Chevrolet

2007-11-25 12:40:49 · 7 answers · asked by Anonymous

Before it burned out I had a miss on accelleration that i could not get rid of. The second distributor lasted about 200 miles. The distributor was a rebiult not new and did make some noise when first started. Is there anything that i can check before i put the third one on.

2007-11-25 04:25:32 · 5 answers · asked by Anonymous

Anyone know where I can get parts. I need a windshield, fuel pump, and the entire winhshield washer engine & components.

2007-11-25 02:04:23 · 7 answers · asked by maddog 3

2007-11-24 15:24:54 · 2 answers · asked by Anonymous

i have a small s-10 pick up and i want to put a v-8 engine in it.

2007-11-24 12:06:07 · 14 answers · asked by A M 1

2007-11-24 08:26:23 · 3 answers · asked by Bones 1

I found a seat that will fit from a private party but I'm not sure how to install the seat since there are no mounts in the back. Any ideas? Thanks!

2007-11-24 08:07:08 · 1 answers · asked by Anonymous

I am going to replace this handle but it has a small rivet in the bottom. After I grind it out Do i have to replace it when I put the new handle on? Also can I grind this one out with an average drill and bit or will it ruin it? thanks

2007-11-24 07:34:33 · 2 answers · asked by jsha2424 3

2007-11-23 12:49:23 · 3 answers · asked by CelticFairy 3

I wana know how I can do it. I already lifted up from the back were the pump is located wats next?>

2007-11-23 08:57:06 · 9 answers · asked by Lil Man88 1

Does it have a limiter in it?Are the limiters in the ECM.I found that it has one and trips the motor at 100mph are their others at a higher torque or do I just need plugs and a fuel filter?

2007-11-23 04:20:21 · 5 answers · asked by who 5

2007-11-23 01:14:03 · 5 answers · asked by jed-55 1

Well I was really curious how much horsepower a Chevy 350 engine had stock, this one came out of a 1988 Chevy Silverado pickup (We want to know because we want to put in into our Camaro XD)

2007-11-22 15:41:05 · 9 answers · asked by Zeypher 1

According to my research , they do not exist. Yet there is one on my daily driver. I need a new lead for a part source which may not be on the web. The teeth on regulators arms are almost worn out. Please, throw a girl a hubcap or something.

2007-11-22 11:10:30 · 6 answers · asked by denmother27 1

whats the loudest exhaust/mufflers out there in shops right now like flowmaster,magnaflow,borla exhaust,cherry bomb.. etc..

2007-11-22 06:34:12 · 11 answers · asked by Anonymous

believe ti or not i checked carefully before i disconnected the hoses now i can't remember where they go.the top and bottom hoses are connected,but i'm lost after that...help.

2007-11-22 04:41:38 · 4 answers · asked by saxaphonist 4

2007-11-21 23:58:23 · 3 answers · asked by xela9090 1

I have a chevy malibu 4-door sendan v-6 3.1 year 1998 stock everything How munch horse power do I have

2007-11-21 19:06:51 · 10 answers · asked by Anonymous

I have high milege vehicle and am replacing drums because of noise when I brake after I instaled new shoes on the car. I understand that I must adjust brakes before putting on new drums. Please help. Thanks, Mike

2007-11-21 14:34:10 · 3 answers · asked by Mike S 6

I'm renting a Chevy Uplander for Thanksgiving and it does not appear to have an owner's manual. Although I wish I were fluent in Spanish, I'm not. How can I change the information to English? For that matter, if I change to English, will I see information in miles instead of kilometres?

If there's a manual online, that's great. But if not, any info is appreciated.

2007-11-21 09:31:21 · 1 answers · asked by Stuck in the Middle Ages 4

my truck is supposed to start when the clutch is engaged, and it has. but now it kinda chooses when it wants to, the last few days i have had to pump and pump and it took nearly 15 minutes before it finally worked. my uncle thinks it is the neutral safety switch. so if you know where this is located and how to replace it.....let me know, we have a big trip to make for thanksgiving......please

2007-11-21 05:56:58 · 9 answers · asked by antiiowan 1

2007-11-21 02:06:20 · 4 answers · asked by toolinggal 1

my truck runs smooth until it gets up to normal temp (210) and then runs like its not firing on all 8 cylinders.what could this be ?

2007-11-20 16:19:49 · 6 answers · asked by Anonymous

2007-11-20 08:02:45 · 7 answers · asked by Danny M 1

Ok so my car is starting up fine then when I go somewhere and get back in it it won't start. Sometimes it will start but then when I go to put it into gear it dies or if I slow to a stop or go to turn a corner it will die on me? It is a 1995 Chevy Lumina. Someone please tell me what's up, I don't have the money to take it to somewhere and them charge me an arm and a leg to find out what it is!!! HELP!

2007-11-20 05:46:03 · 4 answers · asked by Molly Kaye 1

Can anyone tell me what the gear ratio is for the Chevy Silverado with VIN 1GCGK29U5YE152509? It's a 2000 3/4-ton 4x4. Thanks!

2007-11-20 05:14:48 · 3 answers · asked by jeeperamyjo 4

im planning to get into the local dirt track racing.im having a hard time to decide what truck i want to get.does anyone if a colorado would be able to pull a street stock race car.id like a gmc 2500hd disiel but that truck is a 40,000$ truck and disiel isnt cheap anymore not with the japs taking our fuel.i dont want to spend a ton of money on a big truck and only use it once a week to haul sumthing and drive it around the rest of the time with out the trailer on it with the car.

2007-11-20 05:06:58 · 1 answers · asked by Anonymous

my fuel guage does not work. I had another fuel guage that i tried from another blazer just like mine and it didn't work either.A free fuel circuit wiring diagram would be a great help however i cant seem to find one. thanking you in advance

2007-11-20 04:38:11 · 3 answers · asked by emstrod 1

hot cold air was still blowing in the truck. The truck is a old Florida work truck and we took the heater core out years ago when it was leaking, we have since moved up North and need the heat. I think I discovered that there is a cover missing under the dash near the heater core and that all the cold air is blowing out, almost as if the blower is just blowing past the heater core and out this open area therfore not warming the air. I am tring to figure out what this cover may be called, so that I can purchase one to fix the problem. Any suggustions as to what this may be called would be appreciated. Thanks

2007-11-20 03:35:51 · 3 answers · asked by Kim B 2

looking for 4spd console with gauges

2007-11-19 18:21:26 · 6 answers · asked by de4dog 2