believe ti or not i checked carefully before i disconnected the hoses now i can't remember where they go.the top and bottom hoses are connected,but i'm lost after that...help.
2007-11-22 04:41:38 · 4 answers · asked by saxaphonist 4 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
they connect to the fittings on the cooler side of your radiator.
2007-11-22 06:20:08 · answer #1 · answered by edrambo51 3 · 0⤊ 0⤋
It does'nt matter if- it's an after cooler as in after the radiator connections. Generally it is a good idea to introduce the pressure side -(of the tranny-out line) to the higher point of the cooler in-tap. That way the lines empty by themselves while the pressure side remains full as long as possible.
2007-11-23 07:39:53 · answer #2 · answered by racer123 5 · 0⤊ 0⤋
It doesn't matter as long as the loop goes through the cooler or coolers as far as top or bottom and back to the tranny. It sounds like you are using two coolers to me so just make sure it has a loop.
2007-11-22 06:27:31 · answer #3 · answered by Deano 7 · 0⤊ 0⤋
whilst your starter is going out it is going to grind , because of fact the tooth gets wiped out. yet another symptom is which you will not hear something yet a click , that could desire to be the solenoid not working or the kit breaking far flung from the shaft.
2017-01-05 23:54:35 · answer #4 · answered by ? 3 · 0⤊ 0⤋