Car Audio

I want it to take up the whole entire space, and not leave and space out so it fits in perfectly. Is it possible for this to happen, and if yes, can you recommend me to a good one that matches with the interior dash and is good?..

I dont want to put a single one in there cause I dont like that empty slot ontop or bottom of the aftermarket player.
this is what i want to put in will this work?

http://www.circuitcity.com/ssm/Pioneer-In-Dash-Navigation-DVD-Player-AVIC-D3/sem/rpsm/oid/172949/catOid/-13089/rpem/ccd/productDetail.do

2007-04-01 08:27:46 · 3 answers · asked by jeremiha_2000 1

2007-04-01 08:01:52 · 2 answers · asked by Anonymous

I know the saying 'if they want it bad enough they'll steal it no matter what you do' but I had a question. I plan on getting an overhead monitor for my tahoe somewhere around 13" and was wondering how hard it would be for someone to jump in and yank it out. I know there is also a bracket that you insert above your headliner that holds it in there...would it be safer to also put a long piece of sheet metal up there on the bracket as well so that if they do try to yank it out, they'll be pulling on a 3' piece of metal too?

2007-04-01 07:13:07 · 4 answers · asked by LOS 1

if you turn the key foward one time you can hear the stereo but the door bell rings all the time if you turn the key twice all the lights turn on .. so my question is: can you hear music without the door bell ringing..... and does this model of truck doesn't turn the key back ?

2007-04-01 06:33:14 · 3 answers · asked by Anonymous

the problem is i dont have the 6x9s in my rear deck to tap into for a signal. and im trying to avoid removing the door panels.

2007-04-01 04:23:34 · 2 answers · asked by brad w 1

2007-04-01 03:32:06 · 1 answers · asked by Anonymous

450x2 kicker amp , 2ohm kicker solobaric, When I had them hooked up it would shut off all the time. I bought a JL audio 4 ohm speaker and it does great. Is there a way 2 hook up the 2ohm without it shuting off all the time? Or do i need a different amp 4 the 2ohm solobaric?

2007-04-01 03:12:43 · 6 answers · asked by Jeremy C 1

I personally do, but was wondering what the experience has been with others. I feel like with the sound coming only from the front it isn't as submersive. There isn't that feeling like tou are just surrounded by music, it sounds weak and incomplete to me. Apparently there are a lot of people out there that just don't like rear fill and I just have to ask, why? Another thing I have noticed that you can get from 6x9 coaxials that you cant from 6.5" components is more midbass. I know there are some crazy 6.5" midbass pumpin machines out there, but if your bass is coming from the trunk don't you think it's nice just to have a little thump of midbass between between you and your subs? I think it makes an excellent rolloff from your subs. If you don't care about SQ and you just love the sound of your subs drowning everything else out then you might be satisfied without rear speakers, but for me they really seem to add a very nice sound to my system.

And... your thoughts on this?

2007-04-01 03:12:01 · 7 answers · asked by Life Is Illusive 3

Its a sony xplod 200w cd reciever w/ detachable face plate

2007-04-01 00:36:12 · 3 answers · asked by accord240 1

2007-03-31 18:53:53 · 3 answers · asked by Anonymous

i have a sub that has dual voice coils, and each coil has a 4 ohm load. my amp is mono, but has two channels and gives its best output at 2 ohms x 2 ( 2ohms per channel). a total of 2200 watts rms. i don't know what the max output of the amp is. but my sub can handle the 2200 watts rms. how do i get the 2ohms x 2 from the amp wired to the sub?

2007-03-31 18:33:09 · 4 answers · asked by sofreakinawsome 1

the wire harness and radio is for a buick lesabre 2001 i connected every other wire but have brown mute and a orange dash wires thats not connected and can not be connected on the radio know where can you help me

2007-03-31 18:00:05 · 3 answers · asked by samsneed83 1

in amp powers the 500 watt sub and i hook up more speakers could the amp handle it or just blow????

2007-03-31 17:03:45 · 2 answers · asked by Anonymous

15" Crunch Groundpounder
SPECIFICATIONS
700 Watts RMS
1400 Watts Max
Blue Illuminated Speaker Cone
2-Ohm Dual Voice Coils
100 Oz. Double Stacked Magnet Assembly
2.5” 4-Layer Hi-Temp
Aluminum Voice-Coils
Chrome Steel Speaker Frame
w/ Rubber Front Gasket
Glass-Kevlar Woven Dust Cap
Integrated Spider-Tinsel Lead
1.2” Reinforced Rubber Surround
Rubber Magnet Boot
Chromed Back-Plate
Push Terminals Connections
Sealed Enclosure Volume:
2.0 (Cubic Ft.)
Vented Enclosure Volume:
2.5 (Cubic Ft.)
Sold Individually

AMP is a HIFONICS ZX-6400 ZEUS 700watt RMS

can be found at :

http://www.pimpmycar.net/brands_hifonics-amp-multi-channel-zx-6400.html

let me know what you guys think about this setup need to purchase tomorrow 4/1/2007.

Thanks

2007-03-31 16:09:49 · 5 answers · asked by pbell85 2

I had the old w3s in a sealed ported box and it bumped like crazy, but i got the new w3s cuz my speaker was to old. What kind of enclosure wud go best with the w3 in a small car.(Subaru Svx)

2007-03-31 15:46:56 · 3 answers · asked by xxspeeedxx 1

I was wondering if anyone knows where to find a scosche wire harness wire guide online for a 98 olds intrigue.

2007-03-31 14:41:34 · 4 answers · asked by Ryan 1

I have a 1200 watt amp and a sub box with 2 10" subs. but can hooking up a 8 gauge power wire from the battery to the sub directly have enough power to power the sub?

2007-03-31 14:39:04 · 3 answers · asked by Anonymous

MTX Thunder 9500 T9512-44 12'' speaker, TWO OF THESE!!

2007-03-31 14:20:09 · 4 answers · asked by hescalade14 1

I already have an fm transmitter, but with poor results. I own a 06 mazda 5. Thanks

2007-03-31 12:15:22 · 4 answers · asked by Abe U 1

Which is better for a 10" Type R to mount it? What is the difference in mounting it inside out like I guess what you call isobaric? I only have one in 4.5 cu ft vented box.

2007-03-31 12:13:05 · 2 answers · asked by JUAN C 3

2007-03-31 11:28:21 · 5 answers · asked by crumblecustard 2

Hello,
Recently I purchased A Vibe Space SQ12 active subwoofer 1000W RMS 3000W Peak. My car stereo has a special subwoofer output. The problem is that when I connect the subwoofer to the subwoofer output it doesn't produce any sound but just vibrations which get stronger and stronger I push the volume up. If I connect the subwoofer to my front or rear speakers, there is music comming out of it but if I turn up the volume too high the whole system switches off as there have been some kind of overload. The system starts again after I turn the engine off and on again. My car stereo is a Pioneer Avic X1R 4 x 50W RMS.
Any suggestions will be appreciated.
THank you in advance

2007-03-31 10:13:59 · 2 answers · asked by ermalak 1

http://www.alpine-usa.com/US-en/products/product.php?model=IVA-W200

2007-03-31 08:53:48 · 3 answers · asked by Arsen 1

My cars stereo was stolen before i bought the car and i need help figuring out which color wire goes to the front right etc. The stereo i bought to put in my car has all of its wires labeled, whether its negitive or positive and which speaker it goes too, but none of it colors matches the ones left in my car from the factory stereo. Is there a website that has the wiring diagram, or does anyone know which color goes to what?

2007-03-31 06:02:23 · 4 answers · asked by Anonymous

I have a sub and an amp i want to be able to control the level of bass or the volumn of the sub. my amp doesnt have a jack (like a telephone jack) for on those those remote knobs. Do you think my best bet would be to get a knob that connect through the rca cables from the back of the radio to the amp?

2007-03-31 03:46:01 · 6 answers · asked by Anonymous

there is no markings on either of the tabs to which is positive and which is negative. i have the positive hooked up to the bigger tab but it sounds kinda flat. hope someone can help me

2007-03-31 01:04:30 · 4 answers · asked by Anonymous

please reply

2007-03-30 21:33:33 · 4 answers · asked by janettehill185@btinternet.com 1

i just bought an cd player that has sirius satellite ready and was wondering if i still have to buy the satellite radio and have it connected to the cd player?

2007-03-30 18:30:09 · 4 answers · asked by yukmouth 6

I have a 1991 Ford Tempo and I am installing a new cd player. What do I need to get to attach directly into the stereo to the bundle of wires without cutting wires?

2007-03-30 17:37:40 · 3 answers · asked by gospelguy 2

2007-03-30 16:37:16 · 6 answers · asked by favrefanatic1st 1