wire harness instructions?

Question

I was wondering if anyone knows where to find a scosche wire harness wire guide online for a 98 olds intrigue.

Answer 1

I'm not certain what you're looking for. If you're trying to find which Scosche harness fits the 98 Intrigue, it's this one:http://www.buy.com/prod/scosche-gm03b-wiring-harness-for-1992-up-gm-32-pin/q/loc/111/90112788.html

If you're trying to find a guide for the color code on the Scosche harness, each wire should be labeled. However, Scosche follows the CEA standard:
Yellow: constant power
Red: switched power
Black: ground
Orange: illumination
Orange/White: dimmer
Blue: power antenna
Blue/white: amp turn-on
Black/White: amp ground
White: left front speaker (+)
Gray: right front speaker (+)
Green: left rear speaker (+)
Violet: right rear speaker (+)
Black stripes: negative speaker leads

If you're looking for instructions on how to use the harness, you simply solder or crimp the wires together with the same color wires on the new head unit's plug. Leftover wires should be taped off so they won't short out.

Answer 2

i lately did a sixty 9 bronco with a ron francis kit and became exceedingly a lot electriclly challenged. no longer certain how a lot your desirous to keep the unique topic going, yet you are able to prefer to seem into going to a one cord alternator setup. replace the externally regulated unit and doubtless a pertronix ignitor to replace the criteria. can make the set up more convenient plus jointly make your journey a touch more advantageous strong. no longer certain what kit you went with even nonetheless the ron francis kit i used had strong hardware and a effective panel i does no longer recommend them because of the particular incontrovertible fact that there client service became pitiful. they merely dont answer the phone and prefer to call you decrease back 0.5 hour later. My suggestion should be to get some production facility wiring diagrams for once you pass to hook up your gadgets switches,also keep your previous harness intact with a minimum quantity of cutting at the same time as it includes eliminating it. it is going to are available in accessible later and if available take some images of key connections for reference once you ought to, make some notes on paper what cord went the position. and be certain to floor each and every thing i used a significant grounding block behind the sprint for all my grounds. My set up went exceedingly gentle maximum of my time went to the turn signal harness and the wiper change. merely take a at the same time as with it what I did is that if I stuck a snag I merely left it on my own for per week and ought to come decrease back to it later.

Answer 3

is that what they used before they had wiring diagrams in back of repair manuels?

Answer 4

instructions

http://www.installdr.com/InstallDocs/GM/Olds-88.html