Engineering - January 2007

2007-01-03 08:34:09 · 5 answers · asked by rob s 1

2007-01-03 08:31:53 · 2 answers · asked by happyg 1

2007-01-03 08:25:12 · 8 answers · asked by sambo9845 1

Also brief discussion on latest uk government position on radio spectrum allocation and control

2007-01-03 08:19:47 · 1 answers · asked by kamran_ssuet 1

I drive a 4237 # (1922KG) SUV. I was ticketed a couple of months ago for speeding. I have checked and the winds were gusting at 40.3 mph (or 64.8km/h) in the direction of my travel, at my location, at the time of my ticket. I was ticketed for 76mph in a 50 mph zone. What portion of this may be attributed to the "tailwind" and what formula would you use to support that on a scientific and plausible basis?

2007-01-03 07:55:37 · 9 answers · asked by Colleen Ann 3

In my science class I chose to do a report on infrared. Just to say we only had 2 days to do it. I already did the report, but to go along with that I have to have a visual aide. Now my visual aide has to be dealing with or an example of infrared. And it can't be a picture. Does anybody have any ideas?

2007-01-03 07:54:52 · 3 answers · asked by Vandy 1

I know that you have to use triangles, but i'm just wondering what kind would make the bridge more stable. Some say equilateral, but others say isosceles, so does anyone know?

2007-01-03 07:26:35 · 7 answers · asked by Kiwi 1

2007-01-03 06:53:03 · 14 answers · asked by Anonymous

I am a woman studying civil engineering, and i would like your opinions on how women civil engineers are treated on job sites?

I ove engineering and will continue tostudy hard and workhard until i get there no matter what I may have to deal with butI am curious to know if any of you have any interesting stories on how women are treated and howbest to dealwith discrimination?

2007-01-03 06:30:28 · 9 answers · asked by imaginarykitten 3

the circuit concests of a 24v battery, a fuse, a switch and four lamps.

2007-01-03 06:24:38 · 8 answers · asked by Anonymous

2007-01-03 05:36:33 · 1 answers · asked by hub V 1

This question is so annoying been trying to work it out for ages here it is. A seawater pumping station is to pump 15.6 t/h of seawater (relative density 1.03). If it is desired that the velocity in the intake is not to exceed 3/ms and the velocity in the outlet pipe not to exceed 5m/s determine suitable inlet and outlet pipe diameters.

2007-01-03 03:59:19 · 3 answers · asked by Anonymous

2007-01-03 03:49:41 · 5 answers · asked by enchantingmanish 1

2007-01-03 03:47:26 · 12 answers · asked by CPJ 1

2007-01-03 03:45:11 · 7 answers · asked by CPJ 1

what is the safe and maxium pressure of a seamless perspex tube sizes are.12 inches long.3.1/2 inches inside diameta.with a 1/4 inch wall thickness.anser in lbs per square inch of compressed air please.

2007-01-03 03:22:01 · 2 answers · asked by tugboat 4

Typical pin - sharp end traces line spirally edge to edge from the start point to opposite side. How long will the line it traces be in mm?

2007-01-03 03:21:02 · 4 answers · asked by a_s_gray 1

e.g if a circuit had 12ohms resistance, with 10ohms impedance
can these both values be added together giving total resistance?

2007-01-03 03:20:49 · 4 answers · asked by DaNGeRouS MiNDz 2

2007-01-03 03:17:56 · 16 answers · asked by David M 1

Im in the middle of a small assignment and need to list 4 aspects of the fender stratocaster that would have a corresponding manufacturing specification?
What is a manufacturing specificatioN?

Thanks

DArren

2007-01-03 03:03:00 · 2 answers · asked by Anonymous

2007-01-03 02:56:14 · 4 answers · asked by Anonymous

construction

2007-01-03 02:31:28 · 6 answers · asked by rector_21 1

if a 3 phase piece of equipment is to be fitted to a building does the building need to have a 3 phase supply installed.
the building is a warehouse and the equipment comes in a cheaper 3 phase option and a more expensive single phase option.

2007-01-03 02:18:27 · 15 answers · asked by Anonymous

2007-01-03 02:05:12 · 23 answers · asked by Dirty Rob 3

what is the safe,and maxium working pressure of a seamless perspex tube,the size is 12 inches long by 3.1/2 inches inside diameta sealed at both ends,filled with compressed air.

2007-01-03 01:48:20 · 3 answers · asked by tugboat 4

how to consider ROC in case of z-transforms

2007-01-03 01:17:05 · 4 answers · asked by sweety 2

.

2007-01-03 00:38:52 · 1 answers · asked by HHA 1

seg

2007-01-03 00:12:35 · 1 answers · asked by ilan g 1

2007-01-03 00:03:01 · 2 answers · asked by Red Falcon 1

Electronically controlled APT.line™ preheating chamber technology
DS controller with integrated timer 0 to 99 hours

2007-01-02 23:53:38 · 2 answers · asked by halimeh 1