Engineering - January 2007

2007-01-05 21:38:22 · 3 answers · asked by Ram Rimal 1

Can someone teach some basic hacking method

2007-01-05 20:57:49 · 5 answers · asked by spyrockz . 1

3 X 1000 KW Hydro Power Plant is connected to 11 KV grid Substation through 11 KV transmission line of length 17 KM. When power export from this Hydro Plant to 11 KV substation grid is increased from 0 to 3000 KW the sending end (Generation end) voltage is also increased proportionally from 11 KV to 12.5 KV. While voltage at recieving end (Substation end) remain constant. P.F at recieving and sending ends remain constant and maintained as 0.95 (Lagging)

2007-01-05 20:57:32 · 1 answers · asked by sps190474 1

since gravitational force varies with latitude, and hence so does the weight,due to greater distances at the equator, than at the poles,
and hence so do the weights of objects at the surface of the earth at different latitudes due to varying distances from the earths center ,when weighing or calibrating scales or balances at different latitudes, is there a correction applied, so that there is no difference in the weights measured,on an international basis for weighing bulk commodities, assuming weights used for measuring and weighingare SI units of metre ,kilogramme and sec

2007-01-05 20:20:42 · 4 answers · asked by kurien_rockypkr 1

2007-01-05 20:17:52 · 4 answers · asked by Anonymous

2007-01-05 16:28:18 · 2 answers · asked by arjun c 1

Is there any thoery/ facts to show that triangular base is more stable?

2007-01-05 15:32:02 · 10 answers · asked by yap_mailsg 1

Not Ordinary Things Like Go Carts, Golf Carts, Mini Bikes

2007-01-05 15:31:59 · 6 answers · asked by McLad 2

2007-01-05 15:29:45 · 8 answers · asked by Anonymous

7/12x18/35= this is fractions?

2007-01-05 14:54:28 · 9 answers · asked by gimmie 2

2007-01-05 14:41:43 · 4 answers · asked by surshi b 1

2007-01-05 13:32:14 · 10 answers · asked by Nikki 1

2007-01-05 13:21:17 · 9 answers · asked by Anonymous

the components are MAIN CAS ,ONE SHAFT AND ONE GEAR.

2007-01-05 12:57:49 · 2 answers · asked by sina j 1

To both cases; N. America, and Europe.

Who, where ,when, ,why, and how, was it determined that it would operate at 60 & 50 (respectively), cycles p/sec (Hertz-rate).

Surely, there was a process of factors that brought us to where we are today.

Any thoughts-

2007-01-05 12:40:56 · 4 answers · asked by JonnieB 1

Where can I get really thin (maybe 30 or 28 awg) 2 conductor wire in all white? All of the thin wires are usually single, but I want a pair melded together so they dont flop around. it will cary 6V 200mA.
This will be fore a present I'm making, so the (non) visibility of the wire would be a plus. Thanks!

2007-01-05 12:32:21 · 4 answers · asked by azntwboy 1

2007-01-05 10:55:20 · 2 answers · asked by ‬‬∞ LΘVΞ -stuff- 2

a vibrating tuning fork is placed at the open end. as the water is lowered,resonance is first heard when the length of the column is 18.9 cm and then when it is 57.5 cm . what is the frequency of the tuning fork ?

2007-01-05 09:03:26 · 2 answers · asked by Eng.Ma7mood 1

2007-01-05 08:53:13 · 5 answers · asked by Philip B 1

fault occured on local sub station, loads of people experiencing weird electrical faults, e.g. lighting circuit dimming, appliances nearly setting alight fault etc.some had to ring for fire dept, many people have lost there tv due to the fault .electricity board not giving detail of fault they just say that it is rare ,also specialist engineers where called out .could the fault be the transformer or domestic side.overvoltage/current why has this fault occured?

2007-01-05 08:52:59 · 6 answers · asked by Anonymous

I am installing a wood stove in my house with concrete block walls. I am installing the stove pipe out the wall and am I am curious as to what type of temperature the blocks will hold up to?

2007-01-05 08:50:25 · 8 answers · asked by Anonymous

2007-01-05 08:22:30 · 3 answers · asked by Tabata4444 3

2007-01-05 08:13:35 · 3 answers · asked by simplicity steve keshi 1

2007-01-05 08:08:23 · 2 answers · asked by simplicity steve keshi 1

2007-01-05 07:54:06 · 2 answers · asked by Savanna L 1

http://news.com.com/New+UV+gun+takes+aim+at+meth+users/2100-11395_3-6099364.html
http://www.azstarnet.com/business/138816
Here are 2 news articles about useing "spectroscopy technology" to detect traces of harmful drugs. I E-mailed the maker refered to in Arizona about buying one, they never responded.
This could be very usefull in doing home inspections prior to people renting or buying a home, as meth contamanation will make people very ill, and cause the home to be condimed, the residents kicked out untill properly cleaned.
I would also like to be able to walk by the lockers at the High school and submit a list to the school of all the locker numbers that have drug residue on the handles.
Any other Nanotechnology avilable to do anything similar to this? this could open up a whole now service type job, if inspecting for drug residue, not linked to law enforcement, but protection of business homes, schools and families.

2007-01-05 07:43:54 · 1 answers · asked by B Jones 4

2007-01-05 07:40:07 · 10 answers · asked by Savanna L 1

I have been leafing through the machinerys handbook and have been unable to locate a formula for the power required at the motor to tap Acme threads effectively. I want to tap a 5/8-8 Acme continuosly but am conscerned with the HP required. Material to be tapped is AISI 1040.

2007-01-05 07:36:26 · 3 answers · asked by singer 2

2007-01-05 07:27:59 · 11 answers · asked by Savanna L 1

balistics, feet per second

2007-01-05 06:55:14 · 9 answers · asked by rogersgsxr6 1