Do you want to play online?
Well I can help you!
Ok........there are 2 things that you MUST HAVE to play online
1) you will need "broadband'
2) you will also need an e-mail address that works.
If you already know how to play online and your gaming system is saying it can not connect to the internet, set the year to 2000 on your gaming system.
you will also need to reconfigure your IP, then turn off the Rougher for 20seconds and then turn back on, then test your setting’s
if you are playing though a Router/firewall
you will need to Enable Port FORWARDING (Port forwarding can interfere with game play, and some games will say that you Router/firewall is in the way or that the port is not open. for more information on port FORWARDING go to portforward )
(If you have played online before you got a modchip (only if you have) and the sever is saying that it cannot connect, it is because they make a note of your serial no on the HDD and when you get the modchip installed and if you upgrade the HDD the serial no on the HDD is different to the serial no on the HDD that was in your Xbox previously . there is away around this….if you can boot your gaming system with no mod mode then you will be able to play online ;)
(For Xbox, to play online you will need to buy an online card from you local gaming store, for Ps2 you will not need to, you just pay for the price of the LAN)
Have you ever had a problem when a message comes up and say please check your files and configurations?? Well you don’t have to …..All you need to do is turn of the Router for 20 seconds and then turn back on and away you play... ;)
If the sever say please contact someone….DON’T!!!! All you need to do is clean the disk!! And then put the game back in and then reset the console!
When there are no games or other people online.
Stay online and make a game, and in no time someone will join your game.
Most people think because there is no one else online there is no point in
Making a game and then they go offline.
WARINING!! The ISP’S can not help you with online gaming they don’t know anything at all it’s just a waste of time trying to call them and talking, I’m the one that can help you with anything
If you want to play online with games that are made by Sony you will have to register you Ps2 at https://www.ps2registration.com/user/console_registration/index.jhtml and make an account with them. When you do this you will be sent a disk by Sony so you can play online with there games. When you get you Ps2 you will have a pace of paper that will have some information on what to do. Keep this in a safe place. Your online code is on the back of this!!!! AND YOU WILL NEED THE CODE!!!
How to set up if you know nothing about it.
Q) Do you have broadband?
A)
If not, you can talk to you phone company and see if they provide broadband, a recommended broadband provider (ISP) is telecom, It’s the best for playing online gaming
Q) Do you have an E-mail address?
A)
If no, you can set-up an email address at: www.hotmail.com
Q) Do you have a Router?
A)
If you don’t, you can get one from your local DES store.
If you buy a Router you will need to get it set up by a professional (You can fined one in you phone book)
DO NOT, DO NOT!! PLAY ONLINE WITH WIRELESS ROUTER, IT WILL SOLW DOWN GAME PLAY!!!
(You will need to get this set up by a professional…you can fined one in you phone book)
(You will need 2X “Ethernet cable” you can buy them from your local DSE store)
(This is only for people that have a fat Ps2)
If you have an old Ps2 you will need to buy what’s called a PS2 Network Adaptor from TradeMe for $65.00 www.trademe.co.nz
Q) Do you want to talk to other people whilst playing online?
A)
You can buy a Ps2 head set from www.trademe.co.nz
It will help if you make a list of what you need to get when you go shopping for the hardware
Have you ever wanted to know why copied Ps2 or Xbox games will not play back without a mod chip?
Well…..on the disk there is a code(DeCSS), only the Ps2 or Xbox itself can read…if you try copy it with your PC it can not read the code so it can put it onto the other copy .
If you are lucky DVD Decrypter will copy and Decrypt DeCSS (the encrypted code on the disk) and put it onto the copy that you make. %5 out of %100 worked for them and they could play the game with no mod chip. If burning game and DVD’s do not use an 8.5gig bubble layer DVD. It will not play the movies or games. For more information on DeCSS go to
http://en.wikipedia.org/wiki/DeCSS
If you want to copy a Ps2 or Xbox game etc… go to
http://fileforum.betanews.com/download/D for more information on how to copy games see page 6 and 7.
If you try play a copied game online it will not work unless if the game has been patched
With DNAS code (you can down load the patching files from the internet ...search “DNAS patch code”)
Games that where made before 2003 that have online play will not need to be patched DNAS. The DNAS do this to see if the game is real or not and then they let you pasted.
For DNAS error code FAQ go to http://www.dslreports.com/faq/11354
Ps2, Xbox 360 games and DVD from other countries will sometimes not work w/out a mod chip. On the bottom right corner of the box there is a logo that will have NTSC, PAL/SECAM, or SEAM...See the pix bellow with the read cercal around it that’s where the logo is….. On DVD box it will be in different place to the game box. This is a Ps2 game box
N T S C
National Television System Committee
Lines/Field 525/60 Horizontal Frequency 15.734 kHz Vertical Frequency 60 Hz Color Sub carrier Frequency 3.579545 MHz Video Bandwidth 4.2 MHz Sound Carrier 4.5 MHz
P A L
Phase Alternating Line
SYSTEM
PAL
PAL N
PAL M
Line/Field 625/50 625/50 525/60 Horizontal Freq. 15.625 kHz 15.625 kHz 15.750 kHz Vertical Freq. 50 Hz 50 Hz 60 Hz Color Sub Carrier 4.433618 MHz 3.582056 MHz 3.575611 MHz Video Bandwidth 5.0 MHz 4.2 MHz 4.2 MHz Sound Carrier 5.5 MHz 4.5 MHz 4.5 MHz
This will let you play copied games without a mod chip but it will cost.
Programs needed:
Dvd Decrypter: http://dvddecrypter.com/index.php?act=download (I can send this to you for free)
Isobuster: http://www.isobusterdownload.org/isobuster_all_lang.zip (I can send this to you for free)
Cdvdgen: http://www.btinternet.com/~ps2rippininfo/tools/cddvdgen.exe
1) COPY THE PS2 GAME DVD TO YOUR HARD DRIVE AS AN ISO IMAGE.
a) OPEN DVD Decrypter.
b) IN THE DESTINATION AREA, CLICK ON THE FOLDER ICON TO CHOOSE BOTH A NAME AND A STORAGE LOCATION FOR THE ISO IMAGE.
c) CLICK ON MODE > ISO > READ.
D) CLICK ON THE DVD ICON TO START THE PROCESS.
e) WAIT UNTIL THE PROCESS IS FINISHED THEN CLOSE DECRYPTER AND GO TO STEP 2.
2) EXTRACT THE FILES FROM THE ISO IMAGE.
a) CREATE A NEW FOLDER ON YOUR HARD DRIVE TO STORE THE
EXTRACTED FILES.
b) OPEN ISO BUSTER AND CLICK ON FILE > OPEN IMAGE FILE.
c) NAVIGATE TO THE ISO FILE CREATED IN STEP 1 AND CLICK ON “OPEN”.
d) HOLD THE CONTROL KEY ON YOUR KEYBOARD AND LEFT CLICK
EVERY FILE AND FOLDER IN THE LIST.
e) ONCE ALL THE FILES ARE HIGHLIGHTED, RIGHT CLICK ON ONE OF THEM AND CLICK ON “EXTRACT OBJECTS”.
f) NAVIGATE TO THE NEW FOLDER THAT YOU CREATED ON YOUR
HARD DRIVE AND CLICK “OK”.
g) WAIT FOR THE PROCESS TO FINISH THEN CLOSE ISOBUSTER.
3) CONVERT THE EXTRACTED FILES INTO 2 BIN FILES.
a) OPEN CDVDGEN.
b) SELECT “CREATE NEW PROJECT” AND THEN SELECT “DVD-ROM
MASTER DISC”. DRAG CDVDGEN TO THE LEFT SIDE OF YOUR
SCREEN.
c) NAVIGATE TO THE FOLDER THAT YOU CREATED ON YOUR HARD
DRIVE BACK IN STEP 2 AND OPEN IT ON THE RIGHT SIDE OF YOUR SCREEN.
d) SET THE WIDTH OF THAT WINDOW SO THAT IT IS ONLY 1 FILE WIDE. THIS WILL PLACE THE FILES INTO THE SAME ORDER AS THEY WERE ON THE GAME DISK BUT YOU SHOULD CHECK THEM FOR CORRECT ORDER JUST IN CASE.
e) CLICK ON EDIT > SELECT ALL.
f) DRAG ALL THE FILES INTO THE RIGHT SIDE OF CDVDGEN.
g) LOOK FOR A SLUS OR SLES FILE AND WRITE DOWN THE FULL NAME AND THEN CLICK ON THE “VOLUME” TAB IN CDVDGEN.
h) TYPE SLUS OR SLES (WHICHEVER YOUR FILE NAME IS) INTO THE 1ST BOX NEAR "DISC NAME"
i) TYPE ALL OF THE NUMBERS FROM YOUR FILE NAME, WITHOUT THE PERIOD, INTO THE 2ND BOX.
j) TYPE PLAYSTATION FOR THE PRODUCER NAME AND SELECT THE APPROPRIATE LICENSE AREA.
K) CLICK ON "REC...".
l) SELECT YOUR DESIRED STORAGE LOCATION AND NAME THE FILE STAR.IML
m) YOU WILL GET 2 ERRORS, JUST CLICK OK FOR BOTH.
(If you get one error message, then you have to download “WNASPI32.DLL” www.Nero.com/us/WNASPI32.DLL.html
and put it in your windows system 32 folder.
n)THE RECORDING SCREEN WILL POP UP, CLICK ON FILE > EXPORT IMAGE AND SAVE IT ON ONE OF YOUR HARD DRIVES (NOT IN A FOLDER) NAME IT STAR.LST
o) WHEN IT'S FINISHED, YOU WILL HAVE 2 FILES NAMED STAR.000 AND STAR.001
p)CLOSE CDVDGEN AND GO TO STEP 4.
4) MERGE THE .000 AND .001 FILES INTO A SINGLE ISO IMAGE.
THE EASIEST WAY TO MERGE THE FILES IS FROM A COMMAND SCREEN.
YOU WON'T HAVE TO INSTALL AN EXTRA PROGRAM THAT MAY NEED
EXTRA FILES TO WORK AND COME ON, ADMIT IT, DOS IS SO MUCH FUN!!
a) CLICK THE WINDOWS START BUTTON AND CLICK ON RUN.
b) TYPE CMD IN THE BOX AND HIT ENTER.
c) CHANGE THE DIRECTORY TO MATCH WHERE YOU’RE STAR.000 AND STAR.001
FILES ARE STORED.
EXAMPLE- IF THEY ARE ON THE C DRIVE, TYPE CD C:\ AND HIT ENTER.
IF THEY ARE ON ANOTHER DRIVE, TYPE THE DRIVE LETTER WITH A COLON AND HIT ENTER.
d) ONCE YOU HAVE THE CORRECT DIRECTORY-
TYPE COPY/B STAR.000 + STAR.001 STAR.ISO AND THEN HIT ENTER.
e) WHEN IT'S FINISHED YOU WILL HAVE A NEW ISO IMAGE NAMED STAR.ISO THAT YOU CAN NOW BURN IN STEP 5.
5) BURN THE NEW ISO IMAGE ONTO A BLANK DVD (4.7gig).
USE YOUR FAVORITE DVD BURNING UTILITY TO BURN IT AT THE
SLOWEST SPEED.
2007-02-04
21:26:27
·
2 answers
·
asked by
Anonymous
in
Internet