Car Audio

2 rockford fosgate stage 2 8 inches...200RMS..400W max... amp is not a problem..whats the best possible enclosure design...sealed? vented? i listen to house music...and space is no question to

2007-02-18 23:43:27 · 7 answers · asked by Ryan Tanchan 1

2007-02-18 22:45:01 · 2 answers · asked by Karen P 1

2007-02-18 20:19:44 · 6 answers · asked by Anonymous

I have an Alpine head unit, PPI 1000w rms amp, 3 12"subs. I turned all the settings on the amp on the highest level (which i think is wrong, but i figured i can just adjust everything from my head unit).When i turn the volume to 22, it sounds like its bumping hard but once i turn the knob to 23 the bass definitely drops and when i turn the knob higher to 32, the bass is bumping harder than it was on 22 but the treble seems slightly distorted but not too distorted. As far as I can remember, it didnt do this until recently. Im pretty good in adjusting the sound to how i want it to be and this is not really a huge problem for me but it does bother me still. Any specific settings that i need to adjust would be much help. Thanks.

2007-02-18 19:32:25 · 4 answers · asked by Anonymous

I was looking at the Pioneer DEH-1900MP. Here are the specs:

http://www.crutchfield.com/S-Qp0OBI1u2to/cgi-bin/ProdView.asp?g=300&tab=features_and_specs&i=130DEH1900#Tab

I noticed that for most stereos, the RMS Power Bandwith ranges from 20-20kHz, but for this Pioneer it ranges from 50-15kHz.

However, take a look at this excerpt from the manual:
http://img96.imageshack.us/img96/3751/deh1900cf5.jpg

Under audio, it says the 50-15khz, but then under each specific function it has another set of numbers.

Basically, I'm asking if this stereo will be able to replicate low notes around 20Hz. Im using this in conjunction with an amp and two subs, and I obviously do not want to eliminate the 20-50Hz frequency range. Am I misinterpreting what Crutchfield is saying?

2007-02-18 18:55:51 · 1 answers · asked by Nick S 2

2007-02-18 17:45:12 · 4 answers · asked by lilspeedy626 2

Where i can find the the face cd unit for Pioneer KEH-P2035 and what is the price for it and in india,gujarat where i can buy it?

thnak you..

2007-02-18 17:31:22 · 3 answers · asked by Anonymous

Ok, like I said, I have 2100 watts with my capacitor and amp combined, and I need an amp installation kit. Wellllll, I'm looking at this one installation kit that is a 2000 watt kit. Even though it is only 100 watts off, I'm worried that even 100 watts can fry the wires, so, I just need someone to tell me if its ok to go ahead and get the 2000 watt installation kit, or get a more powerfull kit, such as a 3000 watt.......I also tried finding a 2500 watt installation kit, not to much luck there, thought I found something, but I don't know....thanks for the help...and please, someone who knows what they are talking about..

2007-02-18 17:24:56 · 3 answers · asked by me! 1

ok, i hooked my pioneer stereo up n2 my 1994 camry plus my 2 12's...my subs are all correct but theres summN wired wrong with the stereo 2 the car b/c all the wires were spliced an i taped them 2gether but when u hit the gas it makes a weird buzzing noise threw my speakers but (((only when i turn my head lights on())) can sum1 please tell me why its doing that.& wut i hooked up wrong. or send me a pioneer wire color chart 2 a 1994 toyota camry color wire chart my e-mail is amanda55401@yahoo.com PLEASE HELP ME!!!

2007-02-18 17:14:35 · 6 answers · asked by MaNdA 1

im getting a boston acoustics G512 and the ideal enclosure is sealed 1 cu. ft. can anyone tell me where to find one or tell me a rough estimate of how much it would cost to get one custom made at an audio shop.......lets say for instance car toys

2007-02-18 16:38:29 · 4 answers · asked by tai_mai_shu_sr07 2

i always read that sony xplod amps overheat and are bad, i got a sony xplod 1000w amp and i dont have any problems with it...what do people do that makes it overhear easily?

2007-02-18 14:44:29 · 7 answers · asked by Meka 1

if you "double the power" you gain 3 db so does tha mean i would get 107 db from some 200s? or is it still 87???

2007-02-18 14:29:07 · 2 answers · asked by fonzy 3

I need to know how to find aspect ratio for my obsessed dad...

2007-02-18 12:47:43 · 2 answers · asked by blehh 4

I tend to play my music in my car a little to loud and now my back speaker rumbles rather than play a clear sound. Is there any way I can temporarily fix it so that it sounds right until I get the money to buy new car speakers? Right now it's sounding pretty bad and it drives me crazy. Can't do without my music in my car. Thanks in advance for any suggestions or solutions.

2007-02-18 11:19:37 · 9 answers · asked by cookiefactory4 3

2007-02-18 10:56:52 · 1 answers · asked by russel h 1

2007-02-18 09:45:25 · 1 answers · asked by rick h 1

What should i change my settings on my deck to for the questoin above? Such as the EQ-M,EQ-H,EQ-L levels and the "80+" level or the HPF, or the "SLA"?? any suggestions would be great!! thank you!

I have 2 12's in my trunk, 800 watt amp, sealed box if that helps

2007-02-18 06:58:59 · 3 answers · asked by andrewdel9 1

I dont have a wiring diagram for my raidio in my 1991 ford taurus lx. do you know of any websites i can look at for the diagram of where which wire goes where. Do u know where i can find a free diagram on the net or somewhere, everyplace i looked it costs money to look at.

2007-02-18 06:51:47 · 3 answers · asked by gopackgo51 1

The radio/cassette appears to be an all-in-one moulding that takes up a large part of the middle of the dashboard. It doesn't look easy to change it for a CD player but can anyone advise?

2007-02-18 05:13:13 · 3 answers · asked by Pit Bull 5

I have a six CD changer in the trunk of my car therefore i cant change the cd while im driving. also i dont want an mp3 player. is there any recordable cds that can hold more than 80 minutes of music?>

2007-02-18 03:11:40 · 1 answers · asked by DocinT 1

subs are dual 4 ohms

2007-02-18 00:00:06 · 4 answers · asked by augy 1

i have a 1994 bmw 318is. it it from europe. i have a pioneer 6 disc changer in the trunk and a pioneer tape deck that no longer works. i bought a new 2900 pioneer deck. this new deck has an ip usp port on the back for 6 disc changer connection. my problem is the cable running from the 6 disc changer has a bwmpio port. the bmwpio is a round 13 pin connector, but the ip usb is a squaire 12 pin connection. i really need to know how to splice the two connectors together a pin guide would help a lot, hopefully someone else had this problem and i can keep my changer.

2007-02-17 20:31:29 · 4 answers · asked by nathan j 2

I tried to put a cd deck into my car but i got power and sound barely out of the passenger door speaker. My friend that helped me with it said just go get the wire harness and see how it works. could i do without the harness and just try to splice them together or not?

2007-02-17 18:50:50 · 6 answers · asked by gopackgo51 1

I have a 2004 chevy impala, I have a jensen vm9511ts headunit, 2 factory 6x9's, a small amp, and the 2 front door speakers(don't know what they are). I got 2 MA audio 10" subs in a box in the trunk and this amp http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/1605105/vpcsid/0/SFV/30046 to power the subs.

My problem is I'm getting too much bass, the headunit has a built in equalizer but i don't know what to set it on...

2007-02-17 15:41:43 · 4 answers · asked by cutephatgirl504 2

I dont have a wiring diagram for my raidio in my 1991 ford taurus lx. do you know of any websites i can look at for the diagram of where which wire goes where

2007-02-17 14:41:39 · 6 answers · asked by gopackgo51 1

I have an XM radio and want to install a wired FM modulator.
I need to attach wires to the antenna but not sure how to get the radio out.

2007-02-17 13:11:41 · 3 answers · asked by Scotty 6

Would a system running at 1000 watts rms at 1 ohm be as loud as a system 1000 watts rms at 4 ohms. Thanks

2007-02-17 12:47:25 · 4 answers · asked by whitler1234 2

2007-02-17 12:40:50 · 2 answers · asked by steven m 1

I'm looking to intergrate an ipod into my '03 745i so I can use it via the idrive system, but without losing any of the functionality of the idrive (gps, climate, etc.).

Have any of you had any luck doing this?

I've heard that BMW can install an ipod kit, but that they're painfully slow, if they can even do it for a 2003. This "slowness" issue eliminates that option for me.

I'm desparate to know how to get my tunes into my idrive. Let me know if you've had any luck?

Thanks.

2007-02-17 10:44:22 · 1 answers · asked by jimbob 2

2007-02-17 10:28:06 · 2 answers · asked by debijean 3