Our 51 plate Peugeot 307 heater blower stopped working, I looked on here but couldnt find a solution, I checked all the fuses, all ok, so I striped out the dash and found the rheostat plug had melted. It will need a new part of the loom and a new rheostat.
Here is how to find it.
1. Remove the carpet shield above the acc, brake and clutch pedals, (UK Right hand drive)
2. Remove the heater ducting located above and behind the pedals (the part you would need to remove this to change the pollon filter.).
3. Reach inside the large hole in the heater box, at the top you will feel the rheostat, twist it through 45 degrees and it will then come down into the heater box with its plug still attached.
4. unclip the plug and retreve the rheostat, look at the electrical connection pins on the rheostat, if they look burned or slightly overheated then inspection of the plug that is part of the loom is required. continued in my own answer!!!!!
2007-01-07
02:18:41
·
6 answers
·
asked by
Anonymous