English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have faulty horn and need to gain access to repair

2006-12-28 23:02:33 · 2 answers · asked by gmillmillward 1 in Cars & Transportation Car Makes Peugeot

2 answers

If you have the NON-airbag MOMO steering wheel remove the screws holding the steering wheel on and the horn button can be removed from the underside. And you can check the contacts also with the wire lead.

If yours has the Air Bag.. Its most likely Horn Relay or the horn itself...

If you need the AirBag removed find a Bodyshop guy or Service tech to help you disconnect AirBag sensor and the battery before you start prying on the airbag.

Good Luck...

2006-12-31 13:33:31 · answer #1 · answered by Spinner...428 6 · 0 0

At the both sides of the steering wheel there is 2 holes ,using a torch look in these holes you will see what looks like a small metal bar use a plain screwdriver to push the bar in the direction you are inserting the screw driver you may need to apply a little pressure , do this to each hole and the airbag should pop off , ( always disconnect the battery when doing this ) . The hold fault is usually cause by the poor earthing of the black wire on the steering wheel itself , remove this wire and fit an eyelet to it and secure it onto the steering wheel by using a small self tapper screw approx 1 cm long. after doing this ensure you have re-clipped the blue and green airbag triggers into the airbag then clip airbag on , you may need to give it a good push until it fully clipped on , If you feel the job is beyond you I would take it to a Peugeot dealer and for approx 1/2 hr( £35 ish) labour they will do it for you .

2007-01-01 22:28:44 · answer #2 · answered by Grovesy 1 · 0 0

fedest.com, questions and answers