Nissan

im planning to put a 22 inch rims to my nissan patrol GUy61 with a 275/50-55 series tires..need help on the exact offset measuring that i need for the rims...thanks..mike

2007-02-21 14:46:54 · 1 answers · asked by Anonymous

Strut Bearing had to be replaced in my car. I am waiting for my warranty to be transferred onto my name. It would take a couple of weeks from now. Meanwhile, is it safe to drive for a minimum required distance just for regular work? Does it affect any other parts or the engine or fuel efficiency or whatever?

2007-02-21 02:23:42 · 3 answers · asked by bk 2

Hey, I'll probably be purchasing a used 350z sometime in the near future and I have done some research on the tire wear issue. From what I understand the 350z's tire wear issue was resolved on the '05+ right? Were the '05 z's decently built, I mean has anyone else heard about any problems w/ them besides the usual maintenence. thx

2007-02-20 15:29:03 · 6 answers · asked by igy112000 2

what tire would be good
215/40/17 .205/40/17. 215/45/17 or 205/45/17 's

2007-02-20 10:12:27 · 5 answers · asked by jeramy o 1

what tire size should i git and what tire
im thinking of 215/45/17's
im drooping my car down 2'' whith a body kit

2007-02-20 06:38:30 · 3 answers · asked by jeramy o 1

2007-02-20 03:32:27 · 5 answers · asked by m6964us 1

i dont trust taking it somewhere to get done, and im sure its not that hard to perform?? is it too complex or can i handle it?

2007-02-19 21:10:10 · 1 answers · asked by shortstoperic7_2000 2

i dont trust taking it somewhere to get done, and im sure its not that hard to perform?? is it too complex or can i handle it?

2007-02-19 21:09:24 · 1 answers · asked by shortstoperic7_2000 2

Please help I need the room.

2007-02-19 16:20:33 · 2 answers · asked by sarah j 2

I heard that it was near future...as in this summer, but does anyone have any info on it?
any would help...

2007-02-19 16:08:34 · 5 answers · asked by bubdudemj 2

1 of my teeth on my nissian crankshaft sprocket is busted and it made it skip timing as it got turned off with no torque so nothing is bent or warped. can I just pop the sproket off or will I have to lift the motor?

2007-02-19 14:43:56 · 2 answers · asked by Richard S 1

There are four wires which I can not remember what they are.
I think I figure out 3 of them (main power, memory and earth)
There is an orange wire left. CD player is working fine but dash/tail light is not working. If I connect the orange onto the memory, dash and tail light comes on even if igntion is switch off.

Where is this orange wire suppose to go? I though it should be connected onto the CD player but now I am having doubt that I might have accident rip it out from somewhere behind the dash that should be connect to the headlight switch.

2007-02-19 12:55:34 · 1 answers · asked by Chew my Fat 2

2007-02-19 07:17:26 · 3 answers · asked by CARL L 1

2007-02-19 05:39:39 · 7 answers · asked by Anonymous

got a new stereo which needs a different adapter at the back but i dont know where the screws are to take the old strereo out? please help

2007-02-19 01:59:32 · 1 answers · asked by Anonymous

a good brand

2007-02-19 01:45:34 · 3 answers · asked by chihuahuaita31 1

2007-02-19 01:02:01 · 14 answers · asked by James Tt 1

i have a 1990 Nissan pintra ca20e high proformance 4 cyc. i have extracters with a 2 1/2 inch sports exurst with a stanless steel canon 3inch inlet to a 4 inch out let. swapped the stock air filter to a sports pod. pioneer head unit with 6 1/2 inch 180 watt speaker inthe back window and 6 inch 2 way split in the door custum install. i am running about the 120 kw but i still want more power. i would like to put a turbo and plow of valve onto her chip the computer i would like to break the 160 -180 kw mark any one got any ideas

2007-02-18 22:18:19 · 2 answers · asked by Jamz s 2

2007-02-18 11:06:44 · 5 answers · asked by Anonymous

im about to install my cold air intake for my 00 nissan sentra and i do not know what a water exluder looks like or where it is located. can someone help me out?

2007-02-18 09:33:47 · 3 answers · asked by brandon06171987 1

2007-02-18 08:13:48 · 4 answers · asked by brndnh721 3

Its a 1998 toyota corolla. 5 speed. (its been in at least two accidents, heavy damage to the passangers side.). When I baught the car,(with all the dents). I was getting 21 miles to the gallon. Now its down 10miles to the gallon. I have replaced the plugs and wires, the rotor and cap. The air cleaner. I even tried Carberator cleaner.

I also have smoke comming from under my hood, Its been cold and theres a exhaust leak under there somewhere. The smoke is light blue from what I can tell. Its been since December, 45 miles a day @ 55mph. However, the oil is still FULL, and so is the radiator fluid, As the car starts out when its cold, it sputters, untill I hit the high RPM's then its smooth.. (also leaves a trail of light blue smoke going down the road untill it gets warm..).. Any Ideas?

2007-02-18 07:20:48 · 3 answers · asked by ntlgnce 4

Lost my spare key & need to replace it

2007-02-18 04:46:31 · 6 answers · asked by tomdashiell@sbcglobal.net 2

2007-02-18 04:46:03 · 9 answers · asked by Anonymous

I have a Nissan Micra Tempest 52 reg and it is so annoying that it doesnt have any form of clock fitted as standard. Does anyone know if i can get one and where it would fit on the dash? Any suggestions appreciated.

2007-02-18 01:23:05 · 3 answers · asked by nodplod 2

when the car is driven for 5-10 miniutes and then try to start the car would not.Once the engine cools down starts again.Mechanics have replaced 2 distributors thinking the problem is with the coil.So far it has not resolved the problem.With the replacement of the first distributor the car ran ok for about a month then the problems started once again.All other obvious causes have been eliminated.Could this be attributed to a faulty computer? Any suggestions?

2007-02-17 06:24:43 · 3 answers · asked by Riza D 1

2007-02-17 03:15:46 · 8 answers · asked by Ride_The_Spiral 2

i'm trying to put put an altinator from a ford into a nissan nx 1600 they look the same with out the plug. can you help me wire it?

2007-02-16 14:57:25 · 11 answers · asked by bpkmarine269 1

so i changed the big fuel filter in the engine area , but is there more filters somewhere else?

2007-02-16 12:47:25 · 4 answers · asked by launchpad 2

2007-02-16 05:01:32 · 1 answers · asked by Anonymous