Car Audio

i have a 2002 grand cherokee without the infinity system
what would be a smart investment for front door speakers rear door speakers a subwoofer and an amp for under $1000 including whatever else i need? i dont no much so keep answers simple

2007-02-25 14:41:55 · 4 answers · asked by gtwigt32 1

what does it mean by "500 watts RMS x 1 at 4 ohms (900 watts x 1 at 2 ohms)"

2007-02-25 14:32:06 · 9 answers · asked by gtwigt32 1

i have a 2002 grand cherokee and wana no sumthin about amps

front speakers have these specs:
» 2-way crossover network (4,000 Hz, 12 dB/octave)
» frequency response: 40-23,000 Hz
» recommended power range: 10-100 watts RMS (300 watts peak power)
» sensitivity: 92 dB

rear door speakers have these specs:
» 2-way external crossover network (18 dB/octave, 3,500 Hz high-pass and low-pass)
» power range: 2-75 watts RMS (225 watts peak power)
» frequency response: 67-21,000 Hz
» sensitivity: 91 dB

subwoofers have these specs:
frequency response 25-400 Hz
recommended power range 80-600 watts RMS (300 watts per woofer)
peak power 1200 watts
sensitivity 93 dB

i dont no wat requirements i would need for my amp

2007-02-25 14:18:42 · 5 answers · asked by gtwigt32 1

I have a 2002 grand cherokee and am looking into these things:
Polk Audio db6500 6-1/2" Component System - front door speakers
Infinity Reference 5010cs 5-1/4" 2-way Component System - rear door speakers
Visonik V123BP Dual 12" Bandpass Subwoofer
Infinity Reference 1011t 1" Textile Dome Tweeters
and I don't know about the amp yet

2007-02-25 13:57:20 · 5 answers · asked by gtwigt32 1

2007-02-25 13:48:53 · 1 answers · asked by Anonymous

2007-02-25 13:37:31 · 4 answers · asked by Anonymous

2007-02-25 13:36:27 · 5 answers · asked by Anonymous

i've got some 8 gauge power wire that was used for an amplifier.

and i was just wondering if i can use that power wire on my subwoofers.

the reason i want to use it is because i have 2 1000watt RMS subwoofers. and i am sending them the full 1000watts RMS to each one.

but i only have 14 gauge speaker wire. so obviously i need somethin a little more beefy.

so would the 8 gauge power cable do. or am i going to need to buy myself some thicker "speaker" wire

2007-02-25 09:39:48 · 19 answers · asked by Anonymous

I got a 1999 Daewoo Lanos and i am looking up kits to improve my radio. I found some but i dont really understand. all that i get is some black thing. i dont get a radio or anything? the radio i have now is a pull out radio and it sux. only the back speakers are turned on and i cant change it becaus the radio i have now doesnt have nobs to change it. also if i get a kit will i be able to put it in myself without too much problems? the kit is called a Metra 99-8800. pleas help

2007-02-25 06:41:34 · 2 answers · asked by sbriscoe2008 2

When i got my car, the previous owner had installed an alpine mrv-t420 amp that is all wired up and working. Now i just want to add a kicker 10" sub to the setup and my question is....do i just need to connect the sub to the amp with 12gauge wire or is there another step i am missing?

2007-02-25 06:38:26 · 4 answers · asked by knightrider703 1

What is the best boom box or stereo to play burned CDs?

2007-02-25 05:46:45 · 4 answers · asked by laftu 1

The CD player in my car has been acting up. Every time I try to put in a cd who are not scrached up in any way it always gives me an error read message and won't play the music. I use the CD player a lot since I don't want to listen to the stuff that is on any of the radio stations. It always played fine and now it's doing this crap. I have never messed with it in any way either. I just want to know what to do, I'm kind of tired of listening to wind every day.

2007-02-25 04:58:53 · 6 answers · asked by riptor1987 2

i want some subwoofers that arent to expensive and thump loud i want a complete set with the box amp and subs. what brand and whats the best combination. should it be ported vented or sealed box

2007-02-25 04:02:54 · 11 answers · asked by Eric J 2

after installing my amp and all that good stuff. after my fuse blew for the head unit. i was told i should put the next higher rating into that fuses place. the old fuse was a 15. is it okay to put a 20 in without having any problems?

2007-02-25 03:56:10 · 5 answers · asked by Paulie 2

I mean in the display when playing cds or whatever it changes to different colors red blue yellow purple... I hope u can hellp me

Sorry for my english

2007-02-25 02:27:31 · 7 answers · asked by Lizzie Lu in wonderland 1

How do I access them?

2007-02-24 13:37:33 · 3 answers · asked by sidber7 2

Just curious were i could buy some vibration-absorbent pads for 6.5 in car speakers and how i would go about mounting the speakers to them.

2007-02-24 13:23:50 · 6 answers · asked by Elliott B 1

My truck sits probably 10 months out of the year--has a 1 farad cap with a digital read-out--this is 3rd battery--something has ruined--thanks for your help!

2007-02-24 12:27:34 · 8 answers · asked by Anonymous

Try this out and let me know what you think.
http://www.datafilehost.com/download.php?file=6d26c621

You will need Microsoft Excel, a multi-meter and a way to burn an audio CD from an MP3.

__________________________________

This above is a link to an .XLS file that will help you:

1) set the gain control correctly to prevent subwoofer damage
2) determine whether a high output alternator is needed
3) calculate the correct power wires to use for your amp

If you want to keep your system running to it's peak performance, I would highly recommend you take a look.

Feedback is appreciated.

2007-02-24 11:25:52 · 2 answers · asked by Anonymous

I have a 1978 MG B, with an Alpine CD deck, and front speakers (in the door panels). I'd like to add some back speakers but am having trouble finding the right kind (and place for them). Anyone else put some in?

I'm guessing I need some surface mount speakers, but I haven't found a good set of those either.

2007-02-24 10:43:29 · 1 answers · asked by T J 6

i am installing 2 amps to my truck i have a basic idea of what im doing, but a wiring diagram would really help me out alot. anyone know where to find one?

2007-02-24 09:58:03 · 4 answers · asked by do it myself with help 1

My boyfriend is wanting to purchase the Pioneer AVIC-Z1 system but has been hearing from one installer that it will not fit and from another installer that it will fit. If anyone knows if it will fit without cutting into the dash please let me know.

2007-02-24 06:06:14 · 5 answers · asked by Anonymous

can anyone help
what am i doing wrong, is it compatible

2007-02-24 03:35:37 · 4 answers · asked by scot 1

i have the rockford mono block amp and my question is it has two sets of positive and negative terminals should i run my wire from the positive and negative of one set or a positive of one set and the negative of another, does this make a difference

2007-02-24 02:58:02 · 5 answers · asked by morgan d 1

2007-02-24 02:30:03 · 3 answers · asked by Anonymous

I just bought a radio for my car and I also bought a dash install kit just in case I needed it. What is it for and what problem would I run into where I might need the dash install kit?

2007-02-24 01:04:53 · 3 answers · asked by Eric 2

please give me some info on how to do this

2007-02-23 22:52:48 · 2 answers · asked by gona-b-a-gr8 2

2007-02-23 21:25:15 · 3 answers · asked by MICHAEL M 1

2007-02-23 13:54:39 · 4 answers · asked by John 817 1

I just got a 1999 Daewoo Lanos (dont laugh) and it has a crappy radio. it is a pull out Quantum FX or something and it sux. What i want to know is coul i just buy a new slide in radio and it would fit or am i stuck? also, it doesnt have knobs to change from rear speakers to front speakers and it only works in the back. can i change that?

2007-02-23 11:54:05 · 2 answers · asked by sbriscoe2008 2