Ford

i have a two-door 97 ford green ford explorer, wat should i name it?

2007-03-15 15:41:14 · 11 answers · asked by colombianxl 2

2007-03-15 14:56:29 · 9 answers · asked by Anonymous

I have a 2000 Mustang. Sometimes at a stop light, the rpm goes way down like its about to die, then comes back up, sometimes too high. I removed the piece (intake valve???) the thing with the electrical wires connected to it, and cleaned it out with carburetor cleaner, put it back on, and also replaced the air filter (which was MUCH in need of change). I still have the problem. Not quite as bad, but still there nonetheless. I notice there is a little hex screw on the end of the valve. should i turn it ? Keep in mind I know next to nothing about cars, and I only knew to clean that from reading a forum. Do i need to buy a new one??
Thanks!!

2007-03-15 13:48:10 · 8 answers · asked by Dru D 2

does anyone know where the MLP switch on a Ford F350 is; and would this make the truck shift hard and put the engine light on? Husband is a heavy equipment mechanic, but he is stumped on this problem (his truck).

2007-03-15 13:03:43 · 4 answers · asked by julie's_GSD_kirby 5

2007-03-15 12:56:39 · 3 answers · asked by racer14 2

When coming to a stop the brakes squeak and somewhere in the front a clunk noise sounds then cuts out after released? Any idea what the problem is?

2007-03-15 12:00:40 · 5 answers · asked by Chris K 1

I have to be able to back up my statement about the T-Tops, and would appreciate any info you can share. Thanks!

2007-03-15 11:09:21 · 2 answers · asked by Patricia G. W 1

2007-03-15 11:08:09 · 9 answers · asked by JAMIE B 1

Have checked several sources and cannot find information on this model. I was told T-Tops were optional for that year.

2007-03-15 10:27:55 · 5 answers · asked by Patricia G. W 1

2007-03-15 10:17:35 · 3 answers · asked by shane r 1

Recently we moved our clocks ahead an hour. NOW I can't figure out how to chenge the clock in my car. I have tried everything from past experiences in changing clocks in other cars. But can;t figure this one out. I even looked in the manual and its not in there. I looked in the index....on every page and found NOTHING about changing the clock time. Anyone out there know???? Help me please. Thank you....

2007-03-15 10:17:04 · 3 answers · asked by Your Asking Me? 4

any one has a pinto or a maverick they want to sale? i want to put a 5.0 in one!

2007-03-15 08:46:51 · 3 answers · asked by keith f 2

2007-03-15 08:03:36 · 18 answers · asked by archangel72901 4

is there a way of making a boss 302 motor if so how.i know a boss 302 is different form a normal 302 motor?

2007-03-15 07:09:07 · 11 answers · asked by josh_ford_289 1

2007-03-15 07:05:03 · 3 answers · asked by bratsdad2002 1

i have a old ford pickup with a 351 cleveland in it(NOT ORIGINAL MOTOR) i recently got dual exhaust put on it and when i get up to around 55 mph i hear loud backfiring out of the pipes.its a fast pop and happens a couple times a second.also a moth or so back it broke a lifter bridge on the drivers side of the motor.i replaced all lifters and push rods.i hear a slight tapping on the drivers side motor.can you think of anything that it possibly might be and what i could do to fix it. also it doesnt smoke,but everynow and then it does pope out of the carb example going up a hill or passing a car. i thought that might be timing but it didnt help when i adjusted it.

2007-03-15 06:32:03 · 7 answers · asked by josh_ford_289 1

2007-03-15 06:27:48 · 6 answers · asked by Anonymous

2007-03-15 06:03:05 · 5 answers · asked by Generalay 1

2007-03-15 04:01:05 · 6 answers · asked by James R 1

i think when i bought my car i had central locking and now it doesnt work could this be a fuse problem and where is the fuse boxin a fiesta mk 5?

2007-03-15 02:59:07 · 6 answers · asked by scottthegromit 1

does these alike,or do they interchange.are they pretty much the same motor but with different displacements?

2007-03-15 02:41:57 · 8 answers · asked by josh_ford_289 1

What is it more commonly known as, as I can't find any references to it on the internet and I want to know where to get piston rods, head gaskets etc. It's in a Ford Orion and looks pretty much like the standard stock engine.

2007-03-14 22:54:07 · 3 answers · asked by jasie 2

2007-03-14 18:07:52 · 7 answers · asked by Anonymous

2007-03-14 16:20:15 · 4 answers · asked by yankees67k 1

does anyone know how to tighten the steering on a fox mustang so i can get a quicker response? thanks

2007-03-14 16:11:54 · 6 answers · asked by Love Doctor 4

I bought a 2002 ford explorer sport, not a big fan of ford but I liked the look of it and the price was right. Well I found one online and they look really nice lifted with bigger tires on them and since im moving back to arizona and do alot of offroading Im really intrested in doing this. So I was wondering what I should do first? I do want to lift it but not till I move to arizona but Im thinking of things like K&N , Exhaust and things like that.. Oh and are there any magazines that are strictly for ford explorer that I can order or something . Thanks alot

2007-03-14 15:38:18 · 4 answers · asked by Anonymous

My battery light keeps coming on in my '92 Ford Taurus. The mechanic disconnected the battery cable to see if the alternator would quit and it didn't. What may be causing the battery light to come on and off?

2007-03-14 14:06:49 · 6 answers · asked by Nanc J 1

From past experience with Ford,I found them to break quickly and get poor gas mileage,but that was quite a few years ago?How are the newer fords like?

2007-03-14 13:30:35 · 16 answers · asked by Phil 3

2007-03-14 13:16:00 · 8 answers · asked by marcelluswallace 2

We bought this Explorer used and need the code for the keyless entry on the door. The owner's manual says you have to get the code from the module or from the dealer. The dealer wants $32.50 to give me the code so I want to find the module. Please Help. Thanks.

2007-03-14 10:54:03 · 7 answers · asked by CBS 2