Chevrolet

Do this model have power windows if it doesn't have power package can it be installed? Whats the engine on this bad boy(hp,torque,kinds of parts? What's a polley track?

2006-10-08 16:36:49 · 7 answers · asked by sugarbear 1

i want to swap a 350 ci tpi engine in my 94 chev. it currently has a 4.3l engine. but due to emission rules is that engine still in production thru 1994?

2006-10-08 14:33:44 · 6 answers · asked by Acetone28 1

2006-10-08 14:03:39 · 12 answers · asked by anonymous91 1

While driving the car with the A/C on the car's RPMs go up and down making the car slow down and speed up. The A/C works fine it's cold as can be it's just the car jumps and lurches while driving. When I turn off the A/C it's fine. Is there anything I can do to fix this problem?

2006-10-08 06:58:11 · 9 answers · asked by Anonymous

i took it to chevy now 7 times and they advised me that there's no problem although now it's not starting on a pretty much daily basis, i did what the last best answer said and had it towed to them for diagnosis while it wasn't starting and once it got there they started it to move ti out the way then when they ran the test the circuits where all working so they couldn't find the problem. im convinced that they have no idea what they're doing since i told them when i brought it in about the problem and that it needed diagnosis while it wasn't starting but there's no communication between the guy on the phone and the service guy that started it when i told them not to. so how can i get it diagnosed and fixed? im really pullling out my hair over this cause i've only had it 6 months and so many people have looked at it.


please help

2006-10-08 05:12:49 · 7 answers · asked by playboypaul33 1

2006-10-07 12:25:53 · 7 answers · asked by LINDA D 1

2006-10-07 10:37:03 · 8 answers · asked by Anonymous

2006-10-07 08:32:55 · 9 answers · asked by sickbaby 1

i am looking for a website where i can paint and or customize a car online

2006-10-07 07:02:22 · 3 answers · asked by Yvette J 1

2006-10-07 02:57:18 · 19 answers · asked by help me 1

2006-10-06 19:57:51 · 4 answers · asked by itsdmtkid50 2

i have tried to find this item on the internet but i don't know what to call it!

2006-10-06 15:06:31 · 7 answers · asked by oscar 1

My 4-hi isn't working and I would like to find schematics to try and trace what someone suggested. Thank you.

2006-10-06 12:40:11 · 5 answers · asked by Dean 1

I put on a used vac pump and a used motor it didnt help

2006-10-06 11:54:44 · 5 answers · asked by Dean 1

2006-10-06 11:37:38 · 8 answers · asked by Cindy K 1

Yesterday, I stopped in to a mechanic who checked everything. I do need a new sensor on my car and had an air bubble in the hose. He added coolant, and said I need a sensor which he said he would order and put on the car. I might add that recently, I had a new thermostat put in. An hour later, as usual, my car was running hot again. I was told that I could drive this car without the thermostat and that would solve the problem. I am no mechanic, obviously, PLEASE HELP ME!!!!!. Why is my car always running hot?

2006-10-06 05:25:14 · 15 answers · asked by Wanda d 1

2006-10-06 03:09:24 · 18 answers · asked by Tiffany K 3

2006-10-05 19:19:23 · 18 answers · asked by armeman98 1

2006-10-05 19:10:48 · 8 answers · asked by Anonymous

2006-10-05 11:29:21 · 6 answers · asked by gctiangco 1

My 2000 Chevrolet Malibu LS which I have owned since 2001 has over 129,000 miles on it. I have routine maintenance (oil, brakes, belts, tires, etc) done when needed. I have no problem with it so far, other than a couple of computer glitches (one of which was a recall--turn signal problem) which happened around 40,000 miles, and it was fixed on warranty. I recently had the timing belt replaced, and the alternator checks out as good. The mileage is a little less than what it was, but still over 20 miles per gallon. Anybody out there own a Malibu with 200,000+ miles on it? I really like this car, and I hope it lasts a while longer.

2006-10-05 05:13:34 · 9 answers · asked by Diane 1

building an motor out of extra parts, 267 block that is 20 over, useing a 283 crank with the stock lengh rods that will destroke the motor as these motors use the same crank as a 350, the cam and intake are elderbrock profromer's, and the carb is a 390 holley,
i will port match the stock heads
what will the cubic inch be?
what kind of power will this motor make? and at what rpm?
theres no such thing as extra parts

2006-10-05 01:10:19 · 2 answers · asked by jw 2

2006-10-04 20:56:59 · 8 answers · asked by garyhalleck 1

There are no weld marks on this frame. The guy told me it was a California frame. Just wondering if anyone knows anything about this.
Thanks,

2006-10-04 16:58:11 · 6 answers · asked by ibet55 2

I sprayed the car (my1st timepainting a car) and the clear coat came out looking seedy after buffing???????

2006-10-04 15:44:18 · 4 answers · asked by jason s 1

I have a 92 Chevy S10 and I have lowered it 5 inches in the front and 6 inches in the back. I put 4 degree angled blocks in the back and put a 3/4 transmission mount spacer in the front. As I drive down the freeway between 50 and 55 mph I get a pretty good vibration. So what should I do? Do I need to Shim up the back more? Or do I need to shim the transmission mount some more? Or could It be Worn U joints?

2006-10-04 14:59:19 · 7 answers · asked by John J 1

Anybody have some cool facts about the Corvette? I'm doing a research report =]

2006-10-04 14:54:35 · 10 answers · asked by japnitalianchick 2

there is an additional 3rd cooler in front, i'm guessing for crankcase? opened tilt-down panel underneath but just exposed another metal plate. thanks in advance. Phil.

2006-10-04 13:48:44 · 6 answers · asked by Anonymous

2006-10-04 13:03:25 · 5 answers · asked by Anonymous

Its a Geo Prizm 1994 1.6
all i want to know is what it sounds like and what it would look like

2006-10-04 10:53:54 · 12 answers · asked by Anonymous