English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

how do you change it..

2007-12-27 12:53:59 · 3 answers · asked by miranda 1 in Cars & Transportation Car Makes Dodge

3 answers

on that one just get access to the back of the head light and twist off the lock ring and pull outwards on the bulb part that's all you,ll be replacing,don't handle the new bulb with your fingers though the oil from your skin will shorten the life of the bulb,other than that its a fairly easy job,be careful and don't pull on the wires to remove the old bulb pull on the socket part of it,good luck with it,and have a good new years,

2007-12-27 16:16:27 · answer #1 · answered by dodge man 7 · 1 0

Raise the hood and on the rear of the lamp assembly you will find the bulb held in with a large plastic lock ring. twist the ring to unlock and remove. the bulb will now pull out. A good suggestion is to pay attention to the to the position of the bulb when you take it out because it will only go in a certain way. Install the new one( it will fit tight) and install the lock ring Some lock rings are indexed like the bulbs also. Re- connect the wire connector.

2007-12-29 03:26:43 · answer #2 · answered by Jackolantern 7 · 0 0

most vehicles you pop the hood and by the headlights there are screws u unscrew and light will pop out u turn bulb take it out and go to autozone and they will give u a replacememt put in same way u took it out. Make sure u take the bulb to parts store cause there is a number code they need to give u for the same type of bulb..

2007-12-27 12:59:06 · answer #3 · answered by Lisa C 3 · 0 0

fedest.com, questions and answers