2007-12-21 04:58:58 · 7 answers · asked by siktrik68 1 in Sports ➔ Outdoor Recreation ➔ Hunting
As a Gunsmith, I can tell you that you can get your parts directly from Ruger (And they are not hard to get and they ship quickly)
Sturm Ruger & Company, Inc.
Product Service Department
411 Sunapee Street
Newport,New Hampshire 03773
Parts Department for Rifles Open- Mon thru Fri 8AM-5PM
(603)865-2442 Phone
(603) 863-6165 FAX
www.ruger-firearms.com
2007-12-21 05:48:26 · answer #1 · answered by JD 7 · 1⤊ 0⤋
Unfortunately, ruger has always been tough to get parts for, in fact, certain parts, like firing pins can only be obtained and installed by Ruger authorized gun smiths an a lot of their rifles. You might try Numerichs arms, or check with a local gunshop.
Good luck
2007-12-21 13:28:36 · answer #2 · answered by randy 7 · 0⤊ 0⤋
Contact Ruger. On their website are all the phone numbers. They sent me out the parts I needed at a very reasonable price.
In addition, if you buy a Ruger rifle it comes with 1" scope rings. I had a 30mm scope, one phone call and they sent me new 30mm rings, free of charge.
2007-12-21 19:32:59 · answer #3 · answered by Lou 3 · 0⤊ 0⤋
Contact Brownell's at www.brownells.com to see if they have your parts. I have heard, although I don't know this for a fact, that Ruger sells only to factory authorized gunsmiths. If this is the case, you would have to check with Ruger for the nearest factory authorized gunsmith.
2007-12-21 15:09:55 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Midway USA has some Ruger parts:
Here's a link.
http://www.midwayusa.com/ebrowse.exe/browse?TabID=9&Categoryid=11650&categorystring=10636***10560***9142***
2007-12-21 14:18:38 · answer #5 · answered by AL in Bama 3 · 0⤊ 0⤋
try here, i just looked it up on the internet, took me 2 minutes.
http://www.e-gunparts.com/products.asp?chrMasterModel=1910zM77&MC=
2007-12-21 13:46:00 · answer #6 · answered by Craig W 4 · 0⤊ 0⤋
www.jackfirstgun.com
2007-12-21 14:12:38 · answer #7 · answered by Anonymous · 0⤊ 0⤋