English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i asked a similar question here
http://uk.answers.yahoo.com/question/index?qid=20071121131946AAPF943&pa=FYd1D2bwHTHwLb9gE.MySRW6X3JlxiWDq1tYu3Nzp3vFHA--&paid=asked&msgr_status=
i wanted to try it because its hard to wash them properly under the tap, you cant get into the little hole in the centre.
The dishwasher would get them cleaner and more hygienically clean, wouldn't they?

2007-11-21 08:20:36 · 8 answers · asked by Anonymous in Health Diseases & Conditions Respiratory Diseases

8 answers

The problem with the dishwasher is that it will leave a chemical residue in little bitty areas that don't necessarily wash out. You don't want to be inhaling that. You should get a special brush that fits the little hole in the center. Use very hot water to clean the brush and then the little hole. Alternatively, place in dishwasher, but then rinse afterwards. That's what you have to do with baby bottles or they have this filmy soap that you see when you put just water into them.

2007-11-21 10:44:05 · answer #1 · answered by CarbonDated 7 · 1 1

Do not put your inhaler in the dishwasher. Most MDIs
( metered dose inhalers) are in pressurized container which has a measuring or metering device inside which gives you a precise dose of medication. Wipe it off gently with an alcohol pad and do nothing to the little hole or you may destroy it. Never heat it or boil it, very dangerous suggestions and by all means consult with a professional or at least take a look at the manufacturer's directions on use and care. One way that can be used to clear the little hole is to shake the canister as if you will use it and then waste a spray away from your face, this will blow out any particles that are there. This is often done on the first use only because the medication can be so expensive.Or this : " How to clean your inhaler If you use your metered-dose inhaler regularly, clean it every day. To clean the device, remove the metal cartridge. Rinse the applicator under running water, paying special attention to the hole — just inside the mouthpiece — where the medication is dispensed. Air-dry the device. Once it's dry, insert the cartridge with a gentle twist. Keep the protective cap on the inhaler when you're not using it. "

Put it away with it's cap on in a clean place and wash you hands before and after use.

2007-11-21 16:48:31 · answer #2 · answered by VeeBee 5 · 0 0

I am sure if you could put the things you have mentioned here tonight in the dish washer there would be a label on them saying 'dishwasher friendly'. I don't think they do as you ask the questions. I would say no, in that case.

2007-11-21 16:25:35 · answer #3 · answered by Anonymous · 0 1

no not really cos think of all the cemicals u will put inside your body when u go to inhale again,go to docs and get a new one,its cleaner and healther

2007-11-21 16:29:23 · answer #4 · answered by kerriann.cusack 2 · 0 1

Try steeping it in a glass of boiling water

2007-11-21 16:23:44 · answer #5 · answered by melly 4 · 0 1

I don't see why not - remove the cannister first though!

2007-11-21 16:23:39 · answer #6 · answered by Sal*UK 7 · 1 1

are u for real?

2007-11-22 06:36:25 · answer #7 · answered by mrsunshine56987 5 · 0 1

no

2007-11-21 16:31:00 · answer #8 · answered by Georgie 5 · 0 0

fedest.com, questions and answers