English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have cable and use a splitter so I can have cable in my bedroom. I have noticed that when I disconnect the splitter and run the cable directly to the Sony it's an awesome picture but when I have the splitter connected so I can use my bedroom tv the picture isn't as good. Any ideas as to how to fix this. Getting tired of changing the cable connection. Sorry this is so long and complicated, thank you.

2007-11-11 08:20:05 · 1 answers · asked by Mrs. Fuzzy Bottoms 7 in Consumer Electronics TVs

1 answers

Do you have the splitter connected correctly? The main feed should go to the side with only one connector and the tv's connected to the side with two connectors. The only reason I ask this question is that adding a single splitter should not cause this problem unless you have extemely weak signal coming in from the cable company or a bad splitter. If you have it connected correctly, you should contact the cable company about them installing a drop amp to increase your signal level.

2007-11-11 09:15:14 · answer #1 · answered by Anonymous · 1 0

fedest.com, questions and answers