i bought a harness for my car which is a lancer. all is well but the amp shuts off when its set to cd and only kicks on when set to tuner
2007-10-30 18:27:29 · 6 answers · asked by fright 1 in Cars & Transportation ➔ Car Audio
there are 2 remote wires
ELECTRIC ANTENNA and
REMOTE TURN ON for amplifier
most of the times they are blue and blue with a white stripe
switch the cables and it will work
good luck
2007-11-01 03:04:35 · answer #1 · answered by conejote_99 7 · 1⤊ 0⤋
Sounds like the remote wire from your deck is designed for a power antenna. Your deck may not be designed for an amp. You would need to check the manual, or contact the manufacture and see what they would say.
2007-10-30 18:35:09 · answer #2 · answered by blackcobra487 5 · 0⤊ 0⤋
If your remote wire is connected to a blue wire at the deck, switch it to the blue/white wire instead.
2007-10-31 00:51:58 · answer #3 · answered by KaeZoo 7 · 1⤊ 0⤋
First, turn on the CD player and make sure that the amp light is on. If it isn't, then move your remote wire to a fuse, such as the cigarette lighter fuse.
2007-10-30 18:41:37 · answer #4 · answered by zanilth1984 4 · 0⤊ 1⤋
you have the amp connected to the antenna wire (blue& white)
2007-10-31 10:21:36 · answer #5 · answered by Anonymous · 1⤊ 0⤋
check your owners manual,hook up your RCA pin jacks?programing the deck?make sure all ground wires are tight?it can be tough to tell with out being there,sorry i cant be of more help,good luck
2007-10-30 18:39:42 · answer #6 · answered by 2amps 1 · 0⤊ 1⤋