Head Unit- MAX675VD
TV Tuner- TTX7501Z
7in Monitor- (2)VMA7196
Sony Playstation
Ipod
Backup Camera- VTL100
The headunit has 1 AUX AV input (2 ch audio + video)
Video output for rear entertainment
6 ch RCA output and 2 ch RCA output for 2-Zone
CCD camera direct input
how would I set it up so that my rear view camera will come on when I go into reverse? Does it connect to the Head Unit, or the TV tuner? Or do I need another piece?
2007-10-30 14:45:47 · 4 answers · asked by mamba 1 in Cars & Transportation ➔ Car Audio
If this is a car you're installing this in you will have to hook the wire thats specified for the camera's power to the reverse lights wire behind the tail lights. You can usually get a test light and put it in reverse and check each wire until you find it. If its on a truck then there are usually wires under the bed close to the bumper.. But I'm not sure about your backup camera setup but this is how mine went in. hope this helps
2007-10-30 15:03:15 · answer #1 · answered by SPEEDY 4 · 0⤊ 0⤋
it connects to the input were it says (CCD camera direct input) good luck if you did it right then it shood display the back up light automaticaly
2007-10-30 22:04:05 · answer #2 · answered by altima 5 · 0⤊ 0⤋
find a way to have a switch on the shifter to activate it when it is put into reverse and to turn off if it is taken out of reverse
2007-10-30 21:54:13 · answer #3 · answered by zeppelin0890 2 · 0⤊ 1⤋
probably to the backup lights
2007-10-30 21:52:31 · answer #4 · answered by wditt2 4 · 0⤊ 1⤋