2007-10-11 06:55:06 · 3 answers · asked by bud_marcum2000 1 in Consumer Electronics ➔ Home Theater
Before sending it in to the shop, I would check all of the speaker connections and trace all the wiring from the receiver to the speakers to make sure there was no exposed, damaged or crossed wiring anywhere.
2007-10-11 07:05:28 · answer #1 · answered by gkk_72 7 · 0⤊ 1⤋
Most likely you have a short somewhere with the speaker wires. Check to make sure that none are crossed or touching, also make sure that there are no loose wire strands on the back of the receiver. A tiny hair-like copper strand can short out your system. The only other thing is trying to hook up too many speakers or trying to wire them in series which reduced the OHM load and can cause your amp to go into protect mode.
2007-10-11 14:53:34 · answer #2 · answered by TheAnswerGuy 2 · 0⤊ 0⤋
Power supply. Or maybe an IC chip. Repair work is usually $60 an hour in most places. Is the head worth it to you? Or does it make more financial sense to heave it and buy a new one?
2007-10-11 13:59:05 · answer #3 · answered by Quietman40 5 · 0⤊ 1⤋