we hooked up a home theatre system to our tv, but whenever we're watching a dvd and want to put it louder the channel changes, and also when we put the radio on of the home theatre system the tv switches on.
2007-09-23 15:44:31 · 4 answers · asked by Lee 1 in Consumer Electronics ➔ Home Theater
Looks like your TV and the home theater share some IR commands. Rare, but not unusual.
When it is time to watch a DVD, put a little cardboard in front of the IR receiver in the TV, this should fix your problem.
2007-09-23 18:12:44 · answer #1 · answered by TV guy 7 · 0⤊ 0⤋
no and yes. yes the tv can be connected to a home theatre system, but you can not hear the 5.1 sound as you hear through a dvd player because we dont have multi channel sound reception in india yet. even the prologic wont work as it also require atleast a stereo input. you would be listening to only mono sound on thehome theatre system if connected to a TV
2016-05-17 07:28:09 · answer #2 · answered by ? 3 · 0⤊ 0⤋
I assume u are using a "universal" remote.
first make sure the remote is programmed for the correct components.
each one will take a different code.
HOWEVER, if the components are from the same manufacturer u may have some problems.
It doesn't usually happen between different mfg.
2007-09-24 14:17:00 · answer #3 · answered by Bill R 7 · 0⤊ 0⤋
Your Front Panel control buttons are TOUCHY...Turn up the sound and the buttons vibrate enough to make contact...
Doesn't surprise me, I've seen touchy buttons before.....
2007-09-23 15:56:25 · answer #4 · answered by Anonymous · 0⤊ 1⤋