English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am a wedding photographer.i got new nikon d80.
i want to know what is the best setting.i like to
use digital camera with out using computer support.
(i mean Not Nessary Adjeset sharpining & brightness)
can i do this?

2007-09-23 03:52:51 · 4 answers · asked by Ratnasingam J 1 in Consumer Electronics Cameras

4 answers

Rarely I do have to refer to PC editing when it comes to my photo. Like many other good photographers, we rely on the metering on the camera and perhaps only adjust white balance and we'll get a good result.

Of course it would've been better to process the photo afterwards (minor color correction, stuff like that) but it is not required.

2007-09-23 06:05:48 · answer #1 · answered by dodol 6 · 0 0

Well, yes you can. The D80 can be shot just like your 35mm film SLR, but the biggest difference is adjusting white balance. With film, any minor white balance issues are usually handled during the printing process.

So, you're going to have to trust the camera to do some of the work...and you have absolutely *nail* the exposure.

If I read your question correctly, you want to take photos without doing the post-processing adjustments. This is somewhat risky, but doable if your skills are up to it.
1) shoot jpg. If you want insurance, shoot RAW+jpeg, but have lots of memory cards handy.
2) set your white balance to automatic
3) sharpness to medium-high
4) medium-high or normal contrast
5) moderate saturation.

There's a portrait setting too, which you can try, but that gives up too much control to the camera IMHO. However, it will work in a pinch.

To make the jpegs work, you have to be absolutely dead-on on the exposures. But if you shoot with RAW+jpeg, you'll have RAW files as insurance...and you'll have to post-process.

2007-09-23 05:47:05 · answer #2 · answered by anthony h 7 · 1 0

I always shoot on aperture priority. However, that may not be right for your shooting situation. Learn the camera. Read the manual and try things out. That's the only way to fully understand your camera.

2007-09-23 04:53:59 · answer #3 · answered by tigerrrgrrl 3 · 0 0

Find a nice comfortable and quiet place. Now READ & STUDY the Owner's Manual. It was not packed in the box as filler material. Its there for you to use to learn how to operate the camera.

2007-09-23 04:08:54 · answer #4 · answered by EDWIN 7 · 3 0

fedest.com, questions and answers