When I pulled the tab up to open the can, the loop bent and came off. The can is still closed and completely intact only the tab is missing.
2007-09-08 16:46:48 · 11 answers · asked by kris v 1 in Food & Drink ➔ Other - Food & Drink
take the back of a fork and shove it in wehre the tab goes it...it shall work like a charm
2007-09-08 16:54:27 · answer #1 · answered by Arpan 2 · 2⤊ 0⤋
This happened to me the other day, so I used a manual can opener, removed the entire top of the can, and poured the beverage into a glass.
2007-09-12 09:49:48 · answer #2 · answered by Ames 1 · 1⤊ 0⤋
Push down on it with the handle of a spoon or put a paper towel over the hole first and press with your thumb. The towel will help prevent you from getting cut and stop any soda from splashing out.
2007-09-08 17:35:37 · answer #3 · answered by createearlybliss 4 · 0⤊ 1⤋
use a flat metal end like a spoon end or a flat screwdriver....and press really hard on the area where the can hole is suppose to open....with enough force, it should be able to open
2007-09-12 07:37:00 · answer #4 · answered by Xiana 3 · 0⤊ 1⤋
A church key (can punch) will work. This must be a phenomenon peculiar to pop cans, because I never have any trouble with soda cans! :)
2007-09-08 16:56:24 · answer #5 · answered by Anonymous · 1⤊ 1⤋
Use a can opener.
2007-09-08 16:55:52 · answer #6 · answered by Anonymous · 1⤊ 1⤋
Use a bottle opener, like for a beer bottle.
2007-09-08 16:54:34 · answer #7 · answered by RAB in Venus TX 4 · 1⤊ 2⤋
Flathead screwdriver works for me
2007-09-08 16:51:20 · answer #8 · answered by Doc Biz 4 · 2⤊ 1⤋
Hammer a knife in it, especially along the edges.
2007-09-08 16:57:56 · answer #9 · answered by litecandles 5 · 0⤊ 1⤋
manual can opener
2007-09-12 11:22:29 · answer #10 · answered by cheri h 7 · 1⤊ 0⤋