On a 1988 dodge shadow 2.5L i cannot get fuel to the throttle body?

Question

I have replaced the fuel pressure regulator, the fuel pump inside the gas tank, and the fuel filter, What else do i need to do. It has a new top end rebuilt by a very good professional Chrysler mechanic

Answer 1

Check to see if you have power to and from the fuel pump relay. That relay will go bad, and the fuel pump will not get power. There should be several relays in a row on the fender well. If you have power going to the relay, try switching it with one of the others to see if the relay is your problem.

Answer 2

is the fuel pump running?
if you crack a line near the fuel tank do you get fuel there?
Take off the fuel filter and seen if it has fuel coming from the line.
if it does then keep working to the front of the car, if not work towards the back of the car as long as the fuel pump is running

Answer 3

If you can hear the pump come on for a sec when you cycle the key to on, test the fuel pressure at the lines to the injector. If no test fitting, unscrew the line from the pump and check for pressure when cycling the key. If you have pressure to the injector, it may be that the injector is getting no power, or no ground signal from the pcm. Perhaps the crank sensor connector was left unplugged....a few things to check anyway!

Answer 4

Have you checked the fuse for the fuel pump? Is there a bleader valvue on the fuel rail? Maybe a line is plugged.

Answer 5

Have you verified you are getting power to the fuel pump? make sure your fuel pump is actually coming on then go from there.