i have a 1995 dodge ram 2500 with the factory tape player in it. and i was just wondering how to take it out and put in a cd player that i have. also how do i take out the door speakers, it seems as iof two of them are blown.
2007-04-09 05:15:32 · 3 answers · asked by Tim C 5 in Cars & Transportation ➔ Car Audio
That's a pretty easy vehicle to change the radio in. Pull out the cupholder, remove two screws underneath, and remove the cupholder and bracket. Take out the ashtray, remove two screws underneath, then remove the ashtray bracket. After that you can pull off the entire dash panel; just pull around the perimeter of the dash to release the pressure clips. The radio is held in with two 3/8" hex nuts. https://secure.scosche-cars.com/scosche.images/de/deram94/deram94dash02.jpg
You'll need a mounting kit and a Chrysler adapting wire harness to install your CD player. DO NOT cut off the factory plugs. If the truck is equipped with a stock Infinity sound system, then connect the blue wire from the adapting harness to the blue/white wire coming from your CD deck (if the CD player doesn't have a blue/white, use blue; but if it has both, use blue/white).
The door panels have two screws inside the door handle cup and another at the inside top corner of the door panel. After the screws are removed the panel is held on with pressure clips around the perimeter; pry or pull on the edge of the door panel to release the clips. Once one comes free, the others will be easier. If you have the Infinity system, factory amplifiers are attached to the backs of the speakers; you'll have to bypass the amps to install new speakers.
2007-04-09 05:41:44 · answer #1 · answered by KaeZoo 7 · 0⤊ 0⤋
this web site has detailed directions on how to remove the factory stereo from most cars.
http://www.carstereohelp.com/stereoremoval.htm
I paid, I think $3 to get the info on how to remove the stereo from a Honda Accord. Once you know the tricks, you can get it out in no time.
2007-04-09 05:22:05 · answer #2 · answered by Fester Frump 7 · 0⤊ 0⤋
it truly is not basic you may take out the completed the front area of the sprint all the way from the driving force side to the middle console you may positioned the e brake on and positioned the guidance wheel all the way down and positioned the shifter in a million and which could do it oh for sure take the screw driving force and take all the screws out philip screw driving force
2016-11-27 21:53:18 · answer #3 · answered by Anonymous · 0⤊ 0⤋