Can I install automatic transmission, if so which one.
Thanks William
2007-03-25 16:07:54 · 9 answers · asked by wrcarter24 1 in Cars & Transportation ➔ Car Makes ➔ Ford
C4 automatic.
2007-03-25 16:11:03 · answer #1 · answered by Anonymous · 0⤊ 0⤋
yes you can and it'll be fairly easy. Any transmission that'll bolt up to a windsor series small block (289,302,or 351)will bolt up to your engine. You will need to change your flywheel, make sure that your new tranny comes with a torque converter, and you will also need to replace your radiator with on that has the ports for automatic transmission cooling lines. Attention to detail. Also you will need to get a tranny that is compatible with floor shifters, or get a conversion kit to make it compatible. The manual is shorter than its automatic counter-part, and a lot shorter than an over-drive auto, so you will need to move your transmission crossmember back a little and may need to drill new holes in the frame for the new cross-member location. Also if you use an O/D transmission you will probably have to get a custom driveshaft made because I think it highly unlikely that you will find one that just accidentally fits, the good news is that any drive-line shop can cut the material out of your existing driveshaft and rebalance it for you. It's a lot eaier to make them shorter than it is to make them longer. DO Not try to run your new automatic without some type of cooling system, either new radiator, or an after-market transmission cooler because the heat build-up will be incredible and will destroy the transmission very rapidly. I hope that this is helpful to you, and I wish you the best of luck with your swap.
2007-03-25 20:14:31 · answer #2 · answered by truck master 2 · 0⤊ 0⤋
They don't have a 250 6 cylinder till 1969(155hp stock). The C4 would work.
2007-03-26 02:02:09 · answer #3 · answered by Anonymous · 0⤊ 0⤋
With the price of gasoline these days, I'd install an Automatic OverDrive (AOD) transmission so I could get overdrive and a locking torque converter.
2007-03-25 18:37:10 · answer #4 · answered by modesto_jim 2 · 0⤊ 0⤋
I think any C4 cruiseomatic from a v8 or 250 six will work.
ask the expert's to be sure
http://autos.groups.yahoo.com/group/classicmustang/
that 3 speed should be a heavyduty syncro like the v8's use
2007-03-25 16:26:33 · answer #5 · answered by ClassicMustang 7 · 0⤊ 0⤋
specially its the uneven leap that concerns the tournament referee Ball swing alot by way of circumstances in England push aside of floor..i imagine ICC could could concentration extra about pitches in SA and Australia...maximum Australian wickets are between the perfect interior the international yet once in a while they produce shockers like the single SL were given in very last tournament of 2010 ODI sequence.In SA u get wickets the position thers more than a number of uneven leap and customarily ones that ball rises alarmingly from even solid length..
2016-12-02 19:45:57 · answer #6 · answered by ? 4 · 0⤊ 0⤋
Most likely a C-4 ford auto trans and different mounts and drive shaft...
2007-03-25 16:12:21 · answer #7 · answered by RiverRat 5 · 0⤊ 0⤋
Yes, a C4
2007-03-25 16:18:39 · answer #8 · answered by DX 4 · 0⤊ 0⤋
borg warner 35
2007-03-25 16:16:13 · answer #9 · answered by rsdudm 5 · 0⤊ 0⤋