2007-03-25 08:03:17 · 5 answers · asked by matthew H 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
I suggest getting a Haynes or Chilton Auto Tune Up and Repair maunal at a local auto parts store. They cost about $20 and are filled with a lot of information on your vehicle.
This will give you an idea too as to how much work there is to change your rotors. These manuals also have torque settings for the nut you have to remove to pull the rotors.
And when you pull the rotors it is also a good time to inspect and/or replace, repack your bearings with bearing grease.
2007-03-25 08:42:04 · answer #1 · answered by eks_spurt 4 · 1⤊ 1⤋
Remove the wheel and tire, remove the caliper. Take off the funny looking little clips off the lug studs, pull off rotor, replace rotor and brake pads, and reassemble in reverse order.
2007-03-26 12:07:26 · answer #2 · answered by eferrell01 7 · 0⤊ 0⤋
same as a 1979 dodge pickup
2007-03-29 01:25:59 · answer #3 · answered by jsn_ayers 4 · 0⤊ 0⤋
If your asking Go right now to a real mechanic
2007-03-25 18:09:12 · answer #4 · answered by flaltajr 3 · 1⤊ 0⤋
Since your asking and you can't spell.....I suggest you go to a real mechanic
2007-03-26 17:14:08 · answer #5 · answered by diesel_power_87 2 · 0⤊ 0⤋