When replaceing the bolt and safety i found that the bolt goes all the way in but will not completly lock all the way down and will not pull hammer back ready to fire
2007-03-25 07:02:03 · 4 answers · asked by nettyfoxx50 1 in Sports ➔ Outdoor Recreation ➔ Hunting
Assuming it worked before slide it in with triger pulled when it clears the lug release trigger slide closed slide in & out should work pretty simple set up
2007-03-25 07:35:35 · answer #1 · answered by havenjohnny 6 · 0⤊ 0⤋
There are several models of Enfields so there are several variations with their bolts. They entered service in 1888 and are still in use in some places. India made them as late as the 1980s. With the No1 series and the No4 Mk1* make sure the bolt head is screwed all the way down, they bolt head can loosen when you remove it for cleaning. The same applies for the No4 MK1 (No *) but there is a catch that must be depressed to release or fully reinsert the bolt. This site has general info on assembly and dis-assembly of most milsurp rifles: http://www.surplusrifle.com/
2007-03-25 18:59:54 · answer #2 · answered by SW28fan 5 · 0⤊ 0⤋
go to a locoal firearm store
2007-03-25 16:59:31 · answer #3 · answered by twf_fisher 2 · 0⤊ 0⤋
Try this link:
http://enfieldrifles.profusehost.net/ti.htm
Hope this helps.
2007-03-25 14:45:49 · answer #4 · answered by free_eagle716 4 · 0⤊ 0⤋