2007-03-25 00:25:09 · 4 answers · asked by mario 2 in Home & Garden ➔ Decorating & Remodeling
When an engineered floor is installed, the installer MUST leave about 3/8 of an inch all the way around the edge of the room which is covered by the base molding. This allows for expansion and contraction. It sounds like the installer didn't leave ample room around the edges and when the floor expanded, since it has no room to expand, it is "peeking" as you called it.
2007-03-25 00:31:47 · answer #1 · answered by capnemo 5 · 0⤊ 0⤋
I agree with the first answer! It can happen with almost any type of flooring- there must be a small edge left around the room - same with tile - the wood floors will 'peek' and tiles can crack- the base molding hides the edge and leaves room for the expansion.
2007-03-25 00:38:51 · answer #2 · answered by Caroline H 5 · 0⤊ 0⤋
There is another possible answer: moisture. No amount of expansion gap can cure the moisture problem. There are several things to look for: is it all over or just around a outside door, window or an appliance? The installer may not have conducted a moisture reading at the time of installation or even used the wrong sized notched trowel leading to excessive glue ( therefore moisture)
2007-03-25 04:37:10 · answer #3 · answered by Rick H 1 · 0⤊ 0⤋
You said "new home". If it is new and not just new to you, it should have a builders warranty for one year. The floors would be covered under this. The reason they "peeked" has been covered above.
2007-03-25 00:46:25 · answer #4 · answered by sensible_man 7 · 0⤊ 0⤋