I have a 2003 Toyota Tundra with a 6 disk CD player, factory stereo. I have all 6 CDs in and "ERROR" now appears on the screen, the cds won't play, and will not eject. I have had this problem for 2 days and have not been able to get them to do anything. I don't see a pin hole anywhere to "eject" the disks. Any ideas? Is my stereo broken?
2007-03-09 11:59:33 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
This indicates a malfunction of the disc changer functions.
A: Press the reset button on both the changer and the remote. The reset button on the changer is located on the front panel of the unit, It can beactivated with the tip of a pin.
B: If the unit does not operate after resetting it, remove the magazine by inserting a business card between the magazine and the mechanism. The lock lever will disengage to allow the magazine to eject.
C: Make sure all CDs are in the magazine, a CD is found lodged in the carriage, remove all CDs from the magazine and reinsert the magazine into the changer.
D: Press the eject button. This should cause the loged CD to move from the carriage into the empty magazine. The magazine should automatically eject and normal operation will return.
2007-03-09 17:03:45 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Try disconnecting the battery, then connecting it again. Sometimes the break in the electrical signal is all you will need to eject the disks.
2007-03-09 12:03:16 · answer #2 · answered by FireBug 5 · 0⤊ 0⤋
take it too a place that specializes in it or take the sterio out completley and reinstall. sometimes thats all it needs.
2007-03-09 12:04:00 · answer #3 · answered by Deb M 3 · 0⤊ 1⤋