in audio in speakers and tweeters + subwoofers what makes them change the sound rate is it gust the material?

Question

of the speakers such as subwoofers can have thick cotten fibre to make the hollo sound and tweeters have the foil feel which makes the high pitch affect and midbass speakers have the card or paper what makes the sound please explain?

Answer 1

Size, material and physical design are what affect the frequencies that come from the different drivers.

You also have active and passive filters that may also aid in this process.

Answer 2

Its done by eliminating the unwanted frequency's going into the woofer/tweeters by using capacitors at the terminals. The physical size of the speaker cone helps to as high frequency tweeters give a better sound if they're small and light enough to respond.

Answer 3

The size and material affect how a given speaker creates the sound. If you notice, tweeters are normally small and are harder. They also don't move very much (distance). Woofers are usually large and will move quite a bit compared to tweeters.

Answer 4

the sounds comes from the frequency. think of a equalizer....you have say 12 bands.....far left is bass, center is mid and far right it tweeter. bass frequency is a low wave and a tweeter is a high wave.

material for each is used to handle that frequency and put up with it. subs use heavy paper type products to handle the hard thump over n over and tweeters are normally metal or a polymer to handle the super fast movement of the cone.

Answer 5

subwoofers are purely for all of the bass the speaker like 6x9,6x8,5 a million/4, 6 a million/2 those are for greater mid bass and voices. those are super once you acquire some authentic loud subs and that they make it so which you will hear the voices once you particularly get the slamin

Answer 6

magnets my friend