Dose anyone know how to program a universal remote? or have a website to show me how?

Question

i have a syano (sp) TV and a RCA universal remote

sorry forgot to tell you that i no longer have the manual lost it a year ago, when the remote was programed to my other TV

Answer 1

Allright, it's easy go here http://www.replacementremotes.com/tvcodes/index.htm#sanyo
and then your set. Just put those codes in when the remote tells you to enter them.

Answer 2

1=turn on TV
2=remote control = press and hold the "code search key", until the indicator light illuminates, then release code search key.
3 = Press the " TV " key on remote control and release it, the indicator light should blink once and remain lit.
4= Aim the remote at the TV and press the" on-off" key Once.The remote will search for every code, blinking after each code, when it finds the correct code for your TV, it will turn your TV off
5= as soon as your TV turns off, you must press the enter key immediately.
6= Your remote should be usable for your TV. If not, you have to enter this over.
It is easy if you already have your TV on , and already know where your keys are before starting. Keep your remote pointed at your TV doing the entire process or it will not work. This is for the auto code. I never try to find my code, just do the same thing whenever I need to. There is a process that will tell you what code you used.

Answer 3

goto the RCA web site for the remote it will tell you everything you need to know. it will tell how to do it and give a list of codes for the universal remote.

Answer 4

goto the RCA web site for the remote. it will tell how to do it and give a list of codes for the TV.

Answer 5

didn't the remote have instructions