system is not loading and not recognizing that the camcorder is connected. I have downloaded the driver from panasonic "NOT WORKING"...help....
2007-02-24 04:23:48 · 4 answers · asked by janease_m 1 in Consumer Electronics ➔ Camcorders
The first thing you should do is start over, and delete the hardware profile. Go to:
Setings, Control Panel, System.
Click the Hardware tab, and click the Device Manager button. Search for the camcorder profile and delete it. Then re-download the driver. Restart the computer, and follow the directions for seteup.
Should work--good luck
2007-02-24 04:37:52 · answer #1 · answered by Left Bank Hook 4 · 0⤊ 0⤋
you should purchase a video seize divice USB in any computer save or electronics sales and then you connect it to the usb port on your computer then interior the divice you connect the three cables: yellow , pink and white on it. the divice would cost you want 50 money no extra and the mayority of divice convey it own software to edit , then you press (seize) and then press play on your digicam and it is going to record it on you computer . The USB cable that the digicam brings is barely for photos . the only which I telling you is for video seize. i wish this would help you . Have a hey !
2016-12-04 21:33:11 · answer #2 · answered by ? 4 · 0⤊ 0⤋
This iis common. You have to play with it. It's hit and miss. Go to a USER group for video and firewire and give them your details. People with good successes will tell you what they did.
2007-02-24 10:59:35 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Is your camera on and in the VCR mode? If not, try this and it should work. Even if nothing pops up, go into movie maker and click capture, and if it's connected correctly, it'll let you capture. Hope this helps!
2007-02-24 05:26:56 · answer #4 · answered by evilgenius4930 5 · 0⤊ 0⤋