what do dentist use in filling rooth canal treatment of tooth?

Answer 1

The root canal itself is usually filled with a gutta percha that is cemented in the canal. Then a temporary material is placed for a few weeks to assure the soundness of the treated tooth before a more permanent restoration is desired.

The actual filling that covers the RCT, can be amalgam or composite, but in most cases it will be a composite material since the tooth will require a crown and build up to be preformed shortly thereafter. Use of composite as a build up material is what is usually done to save a step. If you already have a crown, then they will usually use a composite to fill the access opening and match the shade. In most cases the crown can be reused, unless it was removed due to, age of crown or excessive decay that may have compromised the margins of the prepared tooth.

Hope I've been of some help, good luck!

Answer 2

RODICA, YOU ARE THE BOSS OF YOUR OWN MOUTH. AS DENTISTS WE CAN ONLY RECOMMEND A ROOT CANAL IF YOU WANT TO SAME THE TOOTH. DON'T FORGET THAT A CROWN WILL BE NEEDED FO THIS TOOTH AFTER THE ROOT CANAL. EXTRACTION IS ALWAYS AN OPTION. YOU CAN PUT DOWN ALL THE $ YOU SAVED TOWARD A NEW PARTIAL DENTURE.

Answer 3

Amalgam (also called silver filling)
Amalgam fillings are a mixture of mercury (from 43% to 54%) and powdered alloy made mostly of silver, tin, zinc and copper commonly called the amalgam alloy.[1], Due to the known toxicity of mercury, the main component of amalgam fillings, there is ongoing discussion on the use of this filling material. Recent study in JAMA cites increased levels of mercury blood levels in children with mercury fillings. [2]

The Chinese were the first to use a silver amalgam to fill teeth in the 7th century; in 1816, Auguste Taveau developed his own dental amalgam from silver coins and mercury. This amalgam contained a very small amount of mercury and had to be heated in order for the silver to dissolve at an appreciable rate. Taveau's formula offered lower cost and greater ease of use compared to existing materials such as gold, but had many practical problems, including a tendency to significantly expand after setting. Because of these problems, this formula was abandoned in France. In 1833, however, two untrained Europeans, the Crawcour brothers, brought Taveau's amalgam to the United States under the name "Royal Mineral Succedaneum"[3]

After widespread adoption and wildly varying standards, the multitude of formulas for making amalgams were standardised into the gamma-2-phase amalgam formula in 1895.

The gamma-2-phase amalgams contain approximately equal parts 50% of liquid mercury and 50% of an alloy powder containing:

> 65% silver (Ag)
< 29% tin (Sn)
< 6% copper (Cu)
< 2% zinc (Zn)
< 3% mercury (Hg)
The resulting amalgam is composed of the gamma phase (the silver-tin eutectic Ag3Sn, which reacts with mercury, yielding the gamma-1 phase (Ag2Hg3) and gamma-2 phase (Sn7-8Hg). The gamma phase is prone to corrosion and its mechanical strength is low. The alloy tends to undergo crevice corrosion and form local galvanic cells.

Around 1970, the ingredients changed to the new non-gamma-2 form, with lower manufacturing cost, greater mechanical strength, and better corrosion resistance. The reduced-gamma-2 amalgams (sometimes referred to as "high-copper" amalgams) contain approximately equal parts 50% of liquid mercury and 50% of an alloy powder containing:

> 40% silver (Ag)
< 32% tin (Sn)
< 30% copper (Cu)
< 2% zinc (Zn)
< 3% mercury (Hg)
The amalgam alloy is strengthened by presence of Ag-Cu particles. The gamma-2 phase reacts with the Ag-Cu particles to form eta phase Cu6Sn5 and gamma-1 phase.

The possible difference in toxicology between the two has not been studied conclusively. Amalgams continue to be used today because they are hard, durable and inexpensive.

When aluminium foil makes contact with an amalgam filling, the saliva acts as an electrolyte and effectively turns the mouth into a battery. This generates a tiny electrical current which is felt through the nerves in the mouth.


[edit] Composite resin (also called white or plastic filling )
Composite resin fillings are a mixture of powdered glass and plastic resin, and can be made to resemble the appearance of the natural tooth. They are strong, durable and cosmetically superior to silver or dark grey colored amalgam fillings. Composite resin fillings are usually more expensive than silver amalgam fillings. Bis-GMA based materials contain Bisphenol A a known endocrine disrupter chemical. PEX based materials do not.

Most modern composite resins are light-cured photopolymers. Once the composite hardens completely, the filling can then be polished to achieve maximum aesthetic results. Composite resins experience a very small amount of shrinkage upon curing, causing the material to pull away from the walls of the cavity preparation. This makes the tooth slightly more vulnerable to microleakage and recurrent decay. With proper technique and material selection, microleakage can be minimized or eliminated altogether.

Besides the aesthetic advantage of composite fillings over amalgam fillings, the preparation of composite fillings requires less removal of tooth structure to achieve adequate strength. This is because composite resins bind to enamel (and dentin too, although not as well) via a micromechanical bond. As conservation of tooth structure is a key ingredient in tooth preservation, many dentists prefer placing composite instead of amalgam fillings whenever possible.

Generally, composite fillings are used to fill a carious lesion involving highly visible areas (such as the central incisors or any other teeth that can be seen when smiling) or when conservation of tooth structure is a top priority.

Composite resin fillings require a clean and dry surface to bond correctly with the tooth, so cavities in areas that are harder to keep totally dry during the filling procedure may require a less moisture-sensitive filling. The use of a rubber dam is highly recommended.


[edit] Glass Ionomer Cement
These fillings are a mixture of glass and an organic acid. Although they are tooth-colored, glass ionomers vary in translucency. Although glass ionomers can be used to achieve an aesthetic result, their aesthetic potential does not measure up to that provided by composite resins.

The cavity preparation of a glass ionomer filling is the same as a composite resin; it is considered a fairly conservative procedure as the bare minimum of tooth structure should be removed.

Conventional glass ionomers are chemically set via an acid-base reaction. Upon mixing of the material components, there is no light cure needed to harden the material once placed in the cavity preparation. After the initial set, glass ionomers still need time to fully set and harden.

Glass ionomers do have their advantages over composite resins:

1. They are not subject to shrinkage and microleakage, as the bonding mechanism is an acid-base reaction and not a polymerization reaction.

2. Glass ionomers contain and release fluoride, which is important to preventing carious lesions. Furthermore, as glass ionomers release their fluoride, they can be "recharged" by the use of fluoride-containing toothpaste. Hence, they can be used as a treatment modality for patients who are at high risk for caries. Newer formulations of glass ionomers that contain light-cured resins can achieve a greater aesthetic result, but do not release fluoride as well as conventional glass ionomers.

Glass ionomers are about as expensive as composite resin. The fillings do not wear as well as composite resin fillings. Still, they are generally considered good materials to use for root caries and for sealants.


[edit] Resin-Ionomer Cement
A combination of glass-ionomer and composite resin, these fillings are a mixture of glass, an organic acid, and resin polymer that harden when light cured. (The light activates a catalyst in the cement that causes it to cure in seconds.) The cost is similar to composite resin. It holds up better than glass ionomer, but not as well as composite resin, and is not recommended for biting surfaces of adult teeth.

In general, resin-ionomer cements can achieve a better aesthetic result than conventional glass ionomers, but not as good as pure composites.


[edit] Porcelain (ceramic)
Porcelain fillings are hard, but can cause wear on opposing teeth. They are brittle and are not always recommended for molar fillings.


[edit] Gold
Gold fillings have excellent durability, wear well, and do not cause excessive wear to the opposing teeth, but they do conduct heat and cold, which can be irritating. There are two categories of gold fillings, cast gold fillings ( gold inlays and onlays ) made with 14 or 18 kt gold, and gold foil made with pure 24 kt gold that is burnished layer by layer. For years, they have been considered the benchmark of restorative dental materials. Recent advances in dental porcelains and consumer focus on aesthetic results have caused demand for gold fillings to drop in favor of advanced composites and porcelain veneers and crowns. Gold fillings are usually quite expensive, although they do last a very long time. It is not uncommon for a gold crown to last 30 years in a patient's mouth.