Windows XP install error?

Question

When i start to install windows XP i get an error that says
Install failed: D:\i386\asms\10\msft\windows\GDIplus.man
on line 4. incorrect function

one of the components that windows needs to continue setup could not be installed

Any idea fellow techies?

Answer 1

You need to access the config file that is calling this file or command in line 4 D:\i386\asms\10\msft\windows\G...to determine what it is looking for.
It could also be a hardware issue...to little info.

Answer 2

Blue show Of dying is what that's talked approximately as. it oftentimes happens after a sparkling hardware merchandise has been put in that your computer does in comparison to. in case you don't be responsive to which hardware is inflicting it, you would be able to would desire to attempt them one by one, i'm hoping you have lots of better stuff around. I even have seen systems that don't prefer to paintings with a undeniable tensechronic. sometimes that's the RAM, yet I even have chanced on that undesirable RAM prevents any booting despite. even so that's a video card or another merchandise. It seems such as you're merely installation this technique, so initiate from scratch. I won't bypass via each thing here, yet initiate by resetting the CMOS, and bypass from there...in certainty handle it like a sparkling build. purely initiate with the basics, not something better. So - a million hard disk drive set to grasp, a million CD ROM (i attempt to apply an ordinary CD ROM as a exchange of a posh DVD burner), a million RAM stick (a 512 is sturdy sufficient), not something is needed here. as quickly as you get the equipment working, you could steadily upload all of the wonderful stuff until considered one of them provides problem, so which you would be responsive to that it is the priority.sturdy success!

Answer 3

Windows installation failures are usually indicative of some kind of a hardware failure. The error you describe sounds to me like the optical drive isn't reading the Windows CD correctly and a file is getting corrupted. It is also a smudge or a scratch on the CD is causing the file to be read incorrectly.

Answer 4

First I would try a different CD. If problem still occurs, I would run a diag on the HD - may be bad. "Ultimate boot CD" search on Google will net you a bootable CD with good HD utilities on it.

Answer 5

Could try to uninstall, then reinstall:

Clean Format and Install WindowsXP:

http://xphelpandsupport.mvps.org/installing_windows_xp.htm

Answer 6

Don't connect more than one cd/dvd rom to do the install. Update the Bios.

Answer 7

probably a hardware problem