English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-12-30 22:38:16 · 13 answers · asked by tractor2006man 1 in Consumer Electronics Cameras

13 answers

Single lens reflex

2006-12-30 22:38:49 · answer #1 · answered by C J 3 · 1 0

SLR Single lens Reflex, many cameras have a viewfinder which is usually to one side of the lens and therefore does not show all that the lens sees. An SLR camera allows you to actually see through the lens utilising a mirror and prism for this purpose. This will normally allow you to see 97 to 99% of what will appear as a captured image. This figure changes with different focal length lens and with digital SLR cameras.

2007-01-02 04:10:27 · answer #2 · answered by Anonymous · 1 0

SLR = Single Lens Reflex

2006-12-31 05:11:32 · answer #3 · answered by dand370 3 · 0 0

Single Lens Reflex

2007-01-01 11:27:58 · answer #4 · answered by CT 6 · 0 0

Single Lens Reflex

2006-12-30 22:41:14 · answer #5 · answered by Anonymous · 0 0

Single Lens Reflex

2006-12-30 22:39:44 · answer #6 · answered by Anonymous · 0 0

Single Lens Reflex

2006-12-30 22:39:09 · answer #7 · answered by Anonymous · 0 0

Single Lens Reflex, IE you see through the same hole as the camera takes the picture through, Twin Lens Reflex you look through one the camera looks through the other

2006-12-30 22:40:58 · answer #8 · answered by ROMFT 3 · 4 0

Single Lens Reflex - the viewfinder looks through the same lens that you take the picture through, via a mirror prism.

2006-12-30 22:46:42 · answer #9 · answered by Vinni and beer 7 · 2 0

ISO is actually a common short name for the International Organisation for Standardization. The ISO setting on your camera is something that has carried over from film. Remember back in the ‘old days’ when you used to go and buy your rolls of film and you would buy film rated at 100, 200 or 400, maybe even 800 or 1600? Well that number refers to the film’s sensitivity to light. The higher the number, the more sensitive to light the film is. The ISO bit is from the standards for film sensitivity, and the number refers to it’s rating.

2016-05-22 23:20:17 · answer #10 · answered by Anonymous · 0 0

fedest.com, questions and answers