My directional blinkers will not work and it isnt the fuses.Does anybody have any ideas?
2006-12-01 10:03:32 · 7 answers · asked by carlcioc@sbcglobal.net 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
check the bulbs, wiring, switch. everything that has to do with the blinkers
2006-12-01 10:07:19 · answer #1 · answered by Anonymous · 0⤊ 0⤋
A part called (flasher) its a relay that can look like a round cylinder or square plastic usually near the fuses or under the dash.
2006-12-01 10:12:05 · answer #2 · answered by Anonymous · 0⤊ 0⤋
do you have a tilt steering wheel? in my dodge truck when i adjusted the wheel to the lowest position they wouldn't work properly, it seems that dodge has a design flaw in the tilt and blinker area. since the truck was brand i took it back to the dealer and they re-routed the wires and now it works fine.
2006-12-01 10:30:28 · answer #3 · answered by barrbou214 6 · 0⤊ 0⤋
have you checked both fuse boxes? you should have one under your hood most everyone think just one fuse box older cars and truck only have one but newer ones have two or more i have 1999 grand am gt that 3 so check you car good look close to the battery for the one under the hood
2006-12-01 10:09:42 · answer #4 · answered by william b 2 · 0⤊ 0⤋
4-way flasher unit - located in the fuse block. check that first, otherwise i suspect a faulty signal switch.
2006-12-04 16:40:06 · answer #5 · answered by viper 1 · 0⤊ 0⤋
If the fuse is ok then replace the flasher if they don't blink but just stay on steady. good luck
2006-12-03 14:30:49 · answer #6 · answered by Anonymous · 0⤊ 0⤋
I'd check the flasher next.
2006-12-01 10:10:06 · answer #7 · answered by hsueh010 7 · 0⤊ 0⤋