Circuits for Servo motor control of an antenna.?

Question

This circuit is intended to be used to track a NOAA satellite for High Resolution Picture Transmission. The motor must be used to dynamically control the position of the antenna for real time tracking based on pre-determined inputs

Answer 1

There are COTS (commercial off the shelf) systems that will do this for you. You need 2 axes of motion on your antenna (azimuth and altitude). You could set up the system to feed these values and have it position, or you could set it up to "find" the signal.

E-mail me for more details.

Answer 2

on account which you're employing MPLAB, i anticipate you're working with Mocrochip contraptions. they have numerous distinctive kinds. they definitely have a reliable library of information and utility notes. go with a device this is designed for use as a motor controller. you will additionally desire an H-Bridge, this is definitely a 2 pole change (employing transistors) which could opposite the effective and damaging strains to the motor. The percentcontrols the H-Bridge. There are a lot of extra issues you are able to upload, like sensors to come across modern-day draw, motor velocity, shaft place etc. yet to easily turn on and opposite a motor, examine the 2d citation: the completed BJT Circuit. Microchip additionally has some very reliable boards. a lot of help could nicely be chanced on there.