English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

im putting in power distrubator
i have a set of neons and underbody kit strobes a power window kit and a 3 port power port what gague wire you thing its a 6 terminal block with 30 amps out of each

the package says
wiring:Output Terminals -.250"x.032" QC rated 30A max Per circuit; Input terminals -#10-32 stud input rated 100A max

Recommended wire size:Input power #4-6; Output circuity #12-16

does that mean anything to anyone im guessing the #10-32 and #4-6 is gauge size but then which one do i use the 10-32 or the 4-6

waht gauge wire do u recomend

2006-10-25 16:03:01 · 3 answers · asked by softwarestealer0 2 in Cars & Transportation Car Audio

3 answers

Go with the 4 gauge, the bigger the better. It's like drinking through a straw, would you rather drink through a stirring straw or a regular straw? The bigger the diameter the easier the flow, whether its liquid or power.

2006-10-25 16:14:12 · answer #1 · answered by bl_arias 4 · 0 0

.250" x .032"= 1/4" x 1 /32 ~ don"t know what QC is.
input terminals #10-32 stud--this is a stud bolt size 10 ( approx. 3 /16" ) with 32 threads per inch.
wire size input power #4 - ,2043 dia. max. amps 135 / #6- .162 dia. max amps. 101
output circuitry # 12- .0808 dia. max amps. 41/ # 16- .0508 dia. max amps. 22

2006-10-26 00:13:01 · answer #2 · answered by tronary 7 · 0 0

REREAD RECOMMENDED WIRE SIZE, THERE IS YOUR ANSWER!~!!!!!

2006-10-25 23:07:32 · answer #3 · answered by midnighttoker 3 · 0 0

fedest.com, questions and answers