English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-10-25 00:22:52 · 7 answers · asked by casakama 1 in Computers & Internet Software

7 answers

I think you mean DVD-R and DVD+R.

Both formats are explained here:
http://en.wikipedia.org/wiki/DVD%2BR
http://en.wikipedia.org/wiki/DVD-R

but essentially they are both standards for a write-once DVD of about 4.7 Gb of data, developed by competing groups.
As of now, most DVD writers are DVD+-R meaning you can put in either +R or -R, doesn't matter anymore. It used to be a pain in the *** though.

Now watch them do it again with bluray and HD-DVD!

2006-10-25 00:28:49 · answer #1 · answered by Anonymous · 1 0

There's nothing called CD+R,

CD-R : Is a read only CD that is writable for the first time only and after that you wont be able to write data on it

CD-RW : Is the rewritable Cd, which you are able to erase and write data serveral times on it

Good Luck

2006-10-25 07:28:06 · answer #2 · answered by AYO-Soft 2 · 0 1

CD-R are one time user CDs. You write to them once and the results are permanent. Can not erase and reuse.
CD-RW are re-writeable. Can be erased and reused. Or formated and used like a gigantic floppy disk.
CD+R does not exist - no such thing.

(There are DVD-R and DVD+R, but not CD+R)

2006-10-25 07:30:07 · answer #3 · answered by dewcoons 7 · 0 0

No such thing as a CD+R, I assume you mean DVD-R and DVD+R?

Traditionally DVD- was the format used for data and DVD+ was the format used for movies. Now, there's no real difference.

2006-10-25 08:25:11 · answer #4 · answered by Chris W 2 · 0 0

As far as CD's go, nothing. it only matters for DVD's it's 2 different formats like someone who speaks english trying to talk to someone who speaks chinese. Also like trying to put a VHS tape in a BetaMax machine.

2006-10-25 07:29:10 · answer #5 · answered by webwriter 4 · 0 0

one has a minus and one has a plus. Hope this cleared it up for you

2006-10-25 07:25:18 · answer #6 · answered by Anonymous · 0 0

the +/- bit tells you what type of drive it can go in.

a + will go in a + drive

a - will go in a - drive

both will go in a +/- drive

2006-10-25 07:32:52 · answer #7 · answered by jimmyc1163 3 · 0 0

fedest.com, questions and answers