JVC PLASMA SCREEN , screen is green on all inputs?

Question

JVC P420PCE

Answer 1

Hard one to answer if you dont know the age of item. but it seems to me that you should return to supplier if possible or call someone who knows as plasma is quite new on market and if it is near a heat source you will have problems with a green screen

Answer 2

i am assuming you just got it and it didn't used to work fine because then you would know your setup is fine and the tv broke.
First plug in an S-video source.
this is the easiest because there is only one wire.
Get out the manual and find where you adjust the picture.
My TV has so many settings, yours is probably just not set up right.
There should be a menu for setup and then something to do with picture. Make sure you are set for s-video. When you can get this working, then try the component video. Make sure the wires are hooked up properly. they are confusing sometimes because one component may label them differently. Here are the labels Y, B-Y, R-Y, or alternatively Y, Pb, Pr, or Y, Cb, Cr. Use this as a guide Y is always Y, B-Y = Pb = Cb, R-Y = Pr = Cr. Hope this helps.

Answer 3

Get rid mate if you can and get a sony bravia hd ready lcd,plasmas are nothing but trouble half the time.

Answer 4

bright green? is it green on areial programmes to? turn colour off so tv is b+w if you havent got a proper b+w photo and it still green tint then your tv needs a look at. maybe one of your outputs has dropped off

Answer 5

your safest bet is to call a T.V.engineer or if its still under the makers guarantee then call the supplier ....sorry but that's the only thing i can advise good luck

Answer 6

check your RGB and s-video settings, make sure you are using a quality scart (not those dodgy black angled ones)

Answer 7

Check your scarts are in tight

Answer 8

tis' BUSTED