I need help programming my keyless entry for my car. When i insert and remove the key more than six times my hazzards do not flash. Can someone tell me what I am doing wrong or something else to try.
2006-09-25 12:06:09 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Nissan
200 Nissan Xterra
2006-09-25 12:39:09 · update #1
2000 i meant
2006-09-25 12:39:22 · update #2
yes it came with keyless entry my remote was damaged though so i bought a new one, i will go try this friggin thing again.
2006-09-25 12:53:13 · update #3
If you are remembering that the ignition key should remain in the“ACC” position throughout the remainder of the programming, including programming of additional remote controlls
then
I would guess you are either going through the insertion/removal key cycling process too fast.
2006-09-25 15:24:57 · answer #1 · answered by msdagney 4 · 0⤊ 0⤋
Get in lower the windows so you can breath. take key out of the switch. all doors,trunk and hood must be closed Be calm lock the doors with the switch. Now six in and outs in ten seconds. now do the turn signals flash? turn ignition to on. Press any button on first remote turn signal flash twice confirmation, "second remote" unlock and lock doors with switch press second remote. To exit key less programing unlock and open Dr's door or start the car.. Each time you mess up you have to start the car and open and close Dr's door go back to key out lock doors and 6 in and out...good luck I know you will get it this time. If it still does not flash check with Nissan dealer did this car come with keyless entry?
2006-09-25 19:48:08 · answer #2 · answered by John Paul 7 · 0⤊ 0⤋
DON'T RUSH WHEN YOU DO THE INSERT AND REMOVE KEY STEPS.
2006-09-28 04:20:27 · answer #3 · answered by PTL 2 · 0⤊ 0⤋
what model nissan is it? year?
2006-09-25 19:13:22 · answer #4 · answered by ? 4 · 0⤊ 0⤋