2006-08-06 13:26:36 · 5 answers · asked by Anonymous in Consumer Electronics ➔ Home Theater
Try doing an internet search, and perhaps you may be able to find what you're looking for...
2006-08-06 23:41:21 · answer #1 · answered by Anonymous · 3⤊ 0⤋
If you buy a Philips PH61153 Video Selector and RF Modulator, or another similar device, you could take the left and right channel audio inputs, and a video input from your Receiver, and plug them into the left and right audio outputs, and video output on the PH61153, and then connect the TV coaxile to the back of the PH61153, as well as the incoming cable service. The incoming cable signal should then pass through and still sent the audio and video signal to the TV, as well as sent the audio and video to the AV Unit. There are many types of these units available. Radio Shack sells something similar. I have bought a few of the Philips units from WalMart to make use of older TV's that only have a coaxile cable on the back. They have worked okay for me. I am actually using one to connect a 27 year old television, a 25 year old Stereo, and a portable DVD player and it works quite well. If you do a web search on PH61153, you will find a number of vendors you can buy from.
2006-08-07 03:59:48 · answer #2 · answered by Gary I 1 · 0⤊ 0⤋
If you have a VHS player or a DVD recorder you don't have to hook up your TV for sound, just use the tuner from your VHS or DVD recorder for sound. Usually VHS has audio outputs in the back just connect this to your receivers audio inputs, either for VHS or tape. The same goes for the DVD recorder. But if you want to hook up your TV regardless, then use your cable output on the back of your TV and hook it to a VHS player or DVD recorder and then hook this up to your sound system.
2006-08-07 11:22:35 · answer #3 · answered by coco2591 4 · 0⤊ 0⤋
In general, the TV won't be a good audio "source". You probably want a Hi-Fi VCR or Cable Tuner that can tune channels and interpret (and decode) audio signal the way you want it interpreted (Surround Sound, Dolby Digital, 5.1, etc.).
2006-08-07 04:37:15 · answer #4 · answered by jherrick 2 · 0⤊ 0⤋
do you have a VCR or DVD??? IS it hooked up to your TV??? One of them should have some audio outs that can be hooked up to the stereo, (receiver)...
2006-08-06 13:32:11 · answer #5 · answered by chazzer 5 · 0⤊ 0⤋