I have a cable through the floor for cable in bedroom but it needs the threaded end on it does anyone know where I can find out how to put the end on it ? With images if possible
2006-08-06 06:32:06 · 6 answers · asked by CARLIE 1 in Consumer Electronics ➔ TVs
Go get one at Radio Shack. There are instructions on the package for how to put it on. Basically, what you do is slip the nut and the collar of the connector on over the cable, then trim back some of the outer insulation. Bend the outer conductor, the shield braid, back over the collar. Then trim back the inner insulation from the center conductor. This wil be the part that enters the female side of the mating connector on the back of the TV, so be sure it sticks out far enough. If need be, trim back the outer insulation some more, so you have enough length to work with. Slip the outer shell of the connector over the bare inner wire, and screw the nut into the back of the connector. The nut should hold the shield braid (the outer conductor) securely to the outer shell of the connector. The inner conductor should stand out far enough to make contact when you join the two mating connectors. Good luck!
2006-08-06 06:35:25 · answer #1 · answered by cdf-rom 7 · 1⤊ 0⤋
Check with Radio Shack. Depending on which type cable you have (RG-59 or RG-6) you'll need the correct connector, which for the RG-59 is a F-59.
If you have never installed one of these, which I assume you haven't, it can be a bit of a hassle.
You have to make sure that the 'center conductor' sticks out far enough but not too much to make proper contact, and the ground part of the connector has to be slipped under the shield of the cable.
Then you need a crimping tool to put a crimp ring in place to hold it together well...
Sorry that's about as simple as I can explain it. Have done it hundreds of times.
2006-08-06 06:35:49 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Slip the connector over the cable as in the picture in the the reference and crimp or tighten it according to the connector you are using.
The thing to watch for is to be sure the wires at the outside of the coax cable do not touch the conductor in the center. It is not dangerous, but will short out your signal and the reception won;t work.
The voltage and power in the coax cable is so small, there is no danger handling it. It is like handling a battery from that respect...
2006-08-06 06:43:08 · answer #3 · answered by Anonymous · 0⤊ 0⤋
"... we all need to die to be sin free as per Romans 6:7......." - If this were true, the Yeshua died in vain, because - once we all die - we "are free from sin", right? Wrong. Sin is the error Man took after Adam's transgression. Once the body is burned, there exist no error. Deleted. That does not mean WE DESERVE ANYTHING, and the fact is, as Yeshua said, we "are slaves good for nothing" that deserve to die, because the ONLY thing that the Law brings in, is death. After Yeshua's resurrection (The First one), many were 'changed' in an instant at their death, and that 'corruptible' was transformed into incorruptible. They are now in an abode with Him in the House of His Father "where there exist many Mansions" and they will come with Him "as in a cloud" when He returns with His saints. Those who He does not recognize as "His sheep" may have to wait until the Resurrection at the end of the 1000 years, where there will be - for some - a Resurrection of Life, and for others a Resurrection of Judgment. The realm of those loyal to Him is the Universe, the Planets ("the stones of fire" originally given to the Spiritual creatures that later on rebelled against God). Things will return to the conditions existent at the very beginning, again, and He will Reign as a King again. btw, you do not need to be a JW to read the Scriptures and let someone tell you what they mean. It's there for all, be free. Read. Learn, The Truth shall make you free.
2016-03-27 01:10:31 · answer #4 · answered by ? 4 · 0⤊ 0⤋
Radio shack also sells twist on connectors for coax cables.
These would not require crimping tools. instructions are on the package. If this is all that is missing, U may be able to just screw this on and be finished.
2006-08-06 07:25:32 · answer #5 · answered by thecoolgeek 2 · 0⤊ 0⤋
You can pick up male connecters for your tv/cable at Best Buy or Radioshack or any other retailer that sells tvs/radios and such
2006-08-06 06:37:09 · answer #6 · answered by Pizzaguy913 3 · 0⤊ 0⤋