How do I remove old paint from trim?

Question

When the former homeowners painted, they made some minor drips and dribbles. I'd like to remove those spots from the baseboards, window trim, and doors. Is there any simple way to do this? (They paint is water soluable but has been there awhile).

Answer 1

Try a product at the paint stores called "OOPS" it is a dried latex paint remover. Careful it can dull the finish on varnished woodwork, just polish afterward or use lemon oil as a finish.

Answer 2

Hey, Read this insert I accrued from web: All sanding or scuffing will have to be performed first. Most most probably that is only for the trim and mouldings. Remember to put drops at the ground to curb cleansing time. The thought in the back of sand and scuffing is to roughen the skin to permit a bigger paint bond. Make definite all places are ready. There is mostly no must cast off the ancient paint until it's wasting its bond and flaking off. Once you're completed open the home windows, grime the partitions and vacuum the ground. Next masks the ground. Use twelve to 20 inch large overlaying paper and one and a part inch blue overlaying tape. Tape the overlaying paper to the bottom of the ground wherein the trim and ground meet all of the method across the room. Then lay drops within the core of the room so that they over lap directly to the paper. Caulk any cracks within the corners wherein partitions meet or wherein the trim or mouldings meet the partitions and ceilings. Use a latex style paintable white or transparent caulk. Use internal spackle for any small nail holes or cracks within the core of partitions or ceilings. If you do decide on this their are plenty of cautions due to the fact you'll get Lead Posioned.

Answer 3

Hi there, read this insert I accumulated from web: All sanding or scuffing will have to be performed first. Certainly this is only for the trim and mouldings. Consider to lay drops on the ground to slash cleaning time. The thought in the back of sand and scuffing is to roughen the outside to allow a better paint bond. Make certain all areas are all set. There may be most likely no must eliminate the old paint except it's losing its bond and flaking off. Once you are finished open the home windows, dust the partitions and vacuum the ground. Next mask the ground. Use twelve to twenty inch large masking paper and one and a 1/2 inch blue overlaying tape. Tape the overlaying paper to the bottom of the ground where the trim and flooring meet the entire approach around the room. Then lay drops within the middle of the room so they over lap on to the paper. Caulk any cracks in the corners the place partitions meet or the place the trim or mouldings meet the partitions and ceilings. Use a latex style paintable white or clear caulk. Use interior spackle for any small nail holes or cracks within the core of walls or ceilings. For those who do opt for this their are a number of cautions when you consider that which you could get Lead Posioned.

Answer 4

hiya, study this insert I accrued from internet: All sanding or scuffing should be carried out first. maximum probably it truly is only for the trim and mouldings. you need to lay drops on the floor to reduce cleansing time. the perception in the back of sand and scuffing is to roughen the floor to allow a better positive paint bond. make certain all aspects are prepared. there is many times no want to get rid of the former paint till it truly is dropping its bond and flaking off. once you're complete open the domicile windows, airborne dirt and mud the partitions and vacuum the floor. next mask the floor. Use twelve to 20 inch huge protecting paper and one and a 1/2 inch blue protecting tape. Tape the protecting paper to the bottom of the floor the position the trim and floor meet all the way around the room. Then lay drops contained in the course of the room so that they over lap on to the paper. Caulk any cracks contained in the corners the position partitions meet or the position the trim or mouldings meet the partitions and ceilings. Use a latex form paintable white or sparkling caulk. Use interior spackle for any small nail holes or cracks contained in the course of partitions or ceilings. in case you do opt for this their are an outstanding style of cautions because you'll get Lead Posioned.

Answer 5

Paint thinner. The brand I use is called KILZ. Works pretty good.

Answer 6

IF ITS MINOR....USE A HAND SANDING TOOL ....ENOUGH TO LEVEL TO THE DRIPS AND ROUGH UP THE SURFACE OF OLD PAINT TO LET NEW STUFF ADHERE...... OTHERWISE...NEED AN ELEC SANDER

Answer 7

http://www.hammerzone.com/archives/interiors/trim/refinish1/stained/strip.htm

Answer 8

Sanding, but will need redone.