when sewing the cloth doesn't get pulled along probably problem with the mechanism that pulls the cloth along
2006-07-04 23:56:38 · 6 answers · asked by boulaunda 1 in Home & Garden ➔ Decorating & Remodeling
On my brother 8200 there is a little switch that you cannot see when the accessory case is on. If you pull the accessory case off and look, there will be a switch that runs left to right, one side has triangles below a line (feed dogs down), and triangles with a line through them (feed dogs up). Make sure the switch is in the right position.
2006-07-09 02:34:48 · answer #1 · answered by TyeDyePrincess 3 · 0⤊ 0⤋
Make sure the feed dog is in the proper position, you may also want to clean and oil the machine. If that don't fix it you will have to have it checked by a sewing machine repair person.
2006-07-05 01:35:06 · answer #2 · answered by judy_derr38565 6 · 0⤊ 0⤋
the stress on the thread isn't tight adequate coming through the stress adjustment on the top of the gadget (topside) -- turn this adjustment to a larger putting for the fabric it truly is getting the balled up mess from the bobin section !! diverse resources require diverse stress alterations --and at the same time as the thread "lock" isn't contained in the course of the fabric -- alterations could be made to manage !! If the "lock stitch" is popping out on acceptable of the fabric -- shrink the gadget head stress --- no matter if it really is popping out on the bottom -- somewhat enhance the gadget head stress !!
2016-11-05 22:03:56 · answer #3 · answered by ? 4 · 0⤊ 0⤋
check to see if you have some thread bunched up beneath the cloth. If so then use a seam ripper to cut it.
2006-07-04 23:59:59 · answer #4 · answered by nastaany1 7 · 0⤊ 0⤋
Is the "feed dog" raised above the surface?
2006-07-04 23:59:59 · answer #5 · answered by sharkgirl 7 · 0⤊ 0⤋
You may need a different size of needle or at least change the needle.
2006-07-05 14:58:01 · answer #6 · answered by Dianne T 3 · 0⤊ 0⤋