i have tried to mega the lines(power lines) but in vein.ab205 is in the family the uh/huey helicopters like those which faught war in viatnam.
2006-07-01 02:56:24 · 2 answers · asked by cha j 1 in Cars & Transportation ➔ Aircraft
I had the same problem in the capatiance fuel qty. indicators of a Cessna 421. It almost drove two of us nuts because it would be intermittent at times and other times wouldn't work at all. We had remove and checked every part of the system and it all checked out good. But installed it didn't.
By accident we discovered that ONE strand of the shielding was touching the conductor wire intermittently. We replaced the end making sure no shielding wires were out of place. The system worked fine after that.
Don't know if this will help but it is the little things that we have a hard time finding.
2006-07-03 16:56:50 · answer #1 · answered by pinelake302 6 · 1⤊ 0⤋
see if you can swap the ind. with a known good one for t/s purposes, if not check the c/b for the ind. see if it is popped, then I would go to the fuel level sensor and check for proper voltage.
2006-07-01 03:05:48 · answer #2 · answered by Anonymous · 0⤊ 0⤋