The plug has a L and 2 lines angled. The wall outlet has like 4 holes different.
Dont say get a new dryer! or move.lol
2007-12-25 14:17:23 · 9 answers · asked by AMNESTY 3 in Home & Garden ➔ Decorating & Remodeling
Are you in the UK where plugs are different? Your problem is actually the wall outlet, which may or may not be for 220v. You can remove the pigtail electric cord as they usually are connected by metal nuts through a small access panel on the back of the dryer, and take it to any big box improvement store and they should be able to help you, but if it is your outlet, you will have to have someone come in to replace it. Ain't nice to fool with that kind of power yourself.
2007-12-25 14:40:25 · answer #1 · answered by ozarks bum 5 · 0⤊ 1⤋
The plug on the dryer is the proper design for the unit. The "L" shaped prong means it's for laundry applications. The recept you have is probably one from a previous electric range. They have the 4 prong design, usually with one of them being a round opening. It's easier to change a dryer cord than to install a new recept, cost of the part is probably close to the same if you're contemplating doing this yourself. If you buy a new cord from a decent hardware, (Ace, Tru-Value, etc.), they can probably help some with instructions. If you get one from a Home Depot, you'll be lucky to find someone who even knows what you're doing.
2007-12-25 14:38:12 · answer #2 · answered by Corky R 7 · 0⤊ 0⤋
If you are in an older home, the outlet must be changed to the new style to meet safety code. If the home is newer and the dryer is an older model, you will need to get the new type of Cord with plug and replace it on the dryer. It may cost around $17.00 to $25.00. Good Luck.
2007-12-25 15:12:09 · answer #3 · answered by sillybreaze 4 · 0⤊ 0⤋
Hi!
There will be output (wattage) imprinted on the wall socket as well as the electric dryer. If both are same either in wattage (or volts), go ahead. Otherwise call in an electrician who will suggest to use an adaptor compatible to both. Good luck!
2007-12-25 20:39:24 · answer #4 · answered by easyboy 4 · 0⤊ 0⤋
You should be able to take a drawing of your outlet to a electric store and get a cord to fit or if not get a outlet that fits your cord.
2007-12-25 14:24:23 · answer #5 · answered by sasyone 5 · 0⤊ 0⤋
Get a new cord or have an electrician change out the receptical. Home improvement stores have different style cords.
2007-12-26 01:59:43 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Go get a new cord from anywhere you can buy electrical supplies. Lowes and Home Depot should have them . It should be under $20
2007-12-25 14:37:28 · answer #7 · answered by BW 2 · 0⤊ 0⤋
As the people suggest..you can buy them ready made..but I suggest..take a picture of the receptacle..and print it out..no mistakes when you buy like this!
2007-12-26 00:10:43 · answer #8 · answered by pcbeachrat 7 · 0⤊ 0⤋
Move house?
2007-12-25 17:11:33 · answer #9 · answered by Trev 6 · 0⤊ 0⤋