Looking for a site to find a JDM nissan front clip or engine swap.?

Question

I have a 93 240sx and i want to get the rb25det, the sr20det from the s13 or my last choice the rb20det.

Answer 1

I've found a few on ebay. they will sell the whole front clip from japan on there. they also have some nice engines on there.

Answer 2

I think it would work. Only if you check the 350Z automatic trans flex plate to the Maxima torque converter. If your using a manual trans I would reccomend a 6 speed unit out of a newer 2001 or 2002 Maxima. The crank shaft posistion sensor should be in the same location so check that too. There will be several interface issues you will need the correct 350Z engine wiring harness and several days of service manual and reaserch into signal wires so you can make the temp Tach and speed sensors all work when your done. Almost always there will be something that will cause a real nightmare like coolant hoses and locations height of the motor to hood clearence and that one pin in the bell housing that won't allow you to bolt up the 350Z motor to the Maxima. Don't expect this to be a week end job it may take months getting everything sorted out. I know you really want a rear drive sports car. It may be cheeper just buying a 2003 350z